Buscar
Itens para a visualização no momento 11-20 of 52
Influência da compatibilização interfacial seletiva nas propriedades mecânicas de compósitos híbridos ternários de PET/fibra de vidro/elastômeros olefínicos reativos
(Universidade Federal de São Carlos, 2009-09-25)
Poly(ethylene terephthalate) (PET) is a semi-crystalline thermoplastic widely used for packaging of aereted soft drinks, which makes the recycling of post-consumer PET material necessary to prevent the negative environmental ...
Estudo da oxidação superficial do copolímero propileno/etileno durante o tratamento corona e sua influência no comportamento de termosoldagem
(Universidade Federal de São Carlos, 2010-06-23)
Different ethylene-propylene copolymers (Ziegler-Natta and Metallocene) were exposed to corona discharge and analyzed by spectroscopic, morphological and fractionation techniques. Effects of different treatment configurations ...
Desenvolvimento e caracterização de blendas e de compostos empregando polímeros biodegradáveis
(Universidade Federal de São Carlos, 2004-10-25)
This work presents theoretical information and experimental data on the behavior of biodegradable polymers and blends of biodegradable PHB polymer with copolyesters that are also biodegradable. Binary mixtures were made ...
Desenvolvimento de um detector de espalhamento de luz LASER de baixo ângulo LALLS operando em tempo real na extrusão
(Universidade Federal de São Carlos, 2005-12-08)
In the present work a prototype of a low angle laser light scattering was developed and installed in an extruder in order to operate in real time. The equipment was built by the research group of which the author is member, ...
Processamento, caracterização e determinação do perfil de polarização do Poli(fluoreto de vinilideno)
(Universidade Federal de São Carlos, 2009-03-25)
This work characterized the ferroelectric polarization of the β-PVDF differentiating the individual contributions of the orientation and the crystalline phases in the remanent polarization of the PVDF. Those contributions ...
Processamento e caracterização de nano-biocompósitos de Poli(hidroxibutirato-co-hidroxivalerato)/montimorilonita modificada organicamente (PHBV/OMMT) com adição de plastificante
(Universidade Federal de São Carlos, 2010-12-10)
A current search for new materials that are economically viable and ecologically correct has led to the implementation of many studies aimed at improving the properties and processability of biodegradable polymers. This ...
Monitoramento in-line da formação de nanocompósitos PP/MMT via intercalação no estado fundido
(Universidade Federal de São Carlos, 2008-08-04)
The aim of this work is to monitor in-line, using an optical detector fitted at the extruder die exit, the formation of PP/MMT nanocomposites during polymer melt compounding. The intensity of the detector´s signal is ...
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Caracterização físico-química de PET ramificado e de suas blendas com PET reciclado
(Universidade Federal de São Carlos, 2004-05-10)
The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate ...