Buscar
Mostrando ítems 71-80 de 175
Avaliação da resistência à fadiga e caracterização microestrutural de fios extrudados e forjados da liga AA7050 reciclada por conformação por spray
(Universidade Federal de São Carlos, 2016-12-19)
High strength 7XXX precipitation hardened aluminum alloys are widely
used in aircraft structural components. The machining process applied in the
fabrication of these components is a low efficiency ...
Estudo da incorporação de nanopartículas de óxido de zinco e pentóxido de nióbio em polietileno linear de baixa densidade
(Universidade Federal de São Carlos, 2019-03-29)
Linear low-density polyethylene (LLDPE) is one of the most widely used materials in greenhouse covering, due to its low cost and transparency to photosynthetically active radiation up to 80%. However, this polymer also ...
Estudo da cinética de sinterização assistida por micro-ondas de pós cerâmicos nano e submicrométricos, com diferentes propriedades dielétricas
(Universidade Federal de São Carlos, 2017-08-30)
Kinetic studies related to microwave assisted sintering of ceramic materials are scarce in the literature, as well as on a nanoscale and submicron scale. Therefore, the aim of this dissertation was to study microwave ...
Avaliação do comportamento mecânico de nanocompósito de PEEK/nHA sob curta e longa duração para aplicação como biomaterial
(Universidade Federal de São Carlos, 2012-04-27)
The main objectives of this dissertation were to study the short (tensile and impact) and long-term (fatigue) mechanical behavior of nanocomposites of poly(ether-ether-ketone), PEEK, with nanohydroxyapatite, nHA, for ...
O revestimento refratário e seu efeito na vida útil e no consumo energético de calcinadores de alumina
(Universidade Federal de São Carlos, 2012-07-25)
The increased need of reducing production costs of commodities raised the importance of reaching higher levels of process efficiency and also the consolidation of financial gains due to larger-scale production capacities. ...
Caracterização das camadas formadas pela nitretação a plasma de ferro sinterizado
(Universidade Federal de São Carlos, 2012-03-06)
Ion nitriding is a process of thermo-physical-chemical treatment that provides a surface hardening, originated by interstitial diffusion of nitrogen on the ferrous and nonferrous alloys surfaces. Understanding and controlling ...
Desenvolvimento de blendas poliméricas policarbonato/ poli (Tereftalato de Butileno) (PC/PBT) compatibilizadas e nanoestruturadas
(Universidade Federal de São Carlos, 2012-03-08)
The evaluation of addition of a random copolymer as compatibilizing and his effect in obtaining nanostructured morphology in blends composed by PC as matrix and PBT as dispersed phase, were investigated. The copolymercom ...
Avaliação do reprocessamento de copolímero SAN através de moldagem por injeção
(Universidade Federal de São Carlos, 2011-06-30)
The main objective of this work was to study the reprocessing of copolymer SAN through injection molding and its influence on the mechanical, thermomechanical and optical behavior of that copolymer. Mechanical properties, ...
Influência da nanoargila no envelhecimento higrotérmico de compósitos de polipropileno / PP maleado / fibra de vidro
(Universidade Federal de São Carlos, 2010-05-21)
In short glass fiber (GF) reinforced polypropylene (PP) composites, despite of the chemically inert and non-polar nature of the matrix, the fiber-matrix interfacial integrity may be compromised in a hygrothermal active ...
Síntese, sinterização em forno de micro-ondas e caracterização da Fe-Ni, PZT e do sistema multifuncional magnetoelétrico PZT/Fe-Ni
(Universidade Federal de São Carlos, 2012-08-30)
The production of multifunctional magnetoelectric materials today is potentiated in the manufacture of particulate (0-3 connectivity) or multilayer (2-2 connectivity) composites comprising a phase with magnetic properties ...