Buscar
Mostrando ítems 11-19 de 19
Influência da nanoargila no envelhecimento higrotérmico de compósitos de polipropileno / PP maleado / fibra de vidro
(Universidade Federal de São Carlos, 2010-05-21)
In short glass fiber (GF) reinforced polypropylene (PP) composites, despite of the chemically inert and non-polar nature of the matrix, the fiber-matrix interfacial integrity may be compromised in a hygrothermal active ...
Parâmetros térmicos de solidificação, microestrutura e resistência mecânica de ligas eutéticas Sn-0,7%Cu-(xNi)
(Universidade Federal de São Carlos, 2013-07-29)
Sn-Pb traditional solder alloys were overly utilize in electronic devices industry, since their properties and features use were adequate and well known. In the last years many restrictions and directives were and have ...
Influência de polipropileno maleado no comportamento de fratura (EWF) de compósitos de polipropileno/fibra de vidro
(Universidade Federal de São Carlos, 2012-04-11)
Thermoplastic composites reinforced with short glass fibers, to be used in technical engineering applications, usually requires a good balance of properties, such as strength and tenacity. For the case of the composite of ...
Crescimento super e subcrítico de trincas em vidros e vitrocerâmicos analisado via indentacão
(Universidade Federal de São Carlos, 2012-07-02)
In this dissertation we quantified properties that may better describe the mechanical behaviour of different glasses and glass-ceramics of the Na2O-CaO-SiO2-P2O5 system, based on the Biosilicate®chemical composition developed ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação direcional de ligas Al-Mg-Fe
(Universidade Federal de São Carlos, 2017-01-18)
Al-Mg-Fe alloys are appointed as favorable ones in respect of the costs involved and all the required properties for successful vessel service. However, experimental inter-relations of solidification thermal parameters, ...
Correlações entre propriedades dinâmico-mecânicas e durabilidade sob fadiga mecânica em compósitos de polipropileno/polipropileno maleificado/fibra de vidro
(Universidade Federal de São Carlos, 2006-09-06)
Although the influence of interfacial adhesion on short-term mechanical
performance of fiber-reinforced thermoplastic composites has been well
established, very little published information is available on the influence ...
Influence of Bobbin Tool Friction Stir Welding (BT-FSW) variants on the microstructure and properties of AA2060 and AA2196 aluminum alloys
(Universidade Federal de São Carlos, 2020-06-18)
In order to reduce total costs in aircrafts production, operation and maintenance, materials and processing techniques have been continuously further optimized. In this scenario, aluminum-lithium alloys have been studied ...
Correlação entre morfologia, percolação elétrica e propriedades mecânicas de compósitos da blenda PLA/PBS com grafite expandido
(Universidade Federal de São Carlos, 2013-12-06)
In recent years, researchers from industry and universities have focused
their interests in polymer nanocomposites, especially in multifunctional
composites. The composites made from nano expanded graphite ( nGE ) ...
O efeito dos tratamentos térmicos na microestrutura e nas propriedades mecânicas de rodas automotivas fundidas a baixa pressão na liga A356
(Universidade Federal de São Carlos, 2019-12-13)
The low-pressure die casting process to produce automotive aluminum alloy wheels is well known, and, in the last decades, has been consolidated as the most common way to produce light automotive wheels in large scale. The ...