Buscar
Mostrando ítems 11-20 de 38
Monitoramento in-line da formação de nanocompósitos PP/MMT via intercalação no estado fundido
(Universidade Federal de São Carlos, 2008-08-04)
The aim of this work is to monitor in-line, using an optical detector fitted at the extruder die exit, the formation of PP/MMT nanocomposites during polymer melt compounding. The intensity of the detector´s signal is ...
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Caracterização físico-química de PET ramificado e de suas blendas com PET reciclado
(Universidade Federal de São Carlos, 2004-05-10)
The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate ...
Estudo e desenvolvimento de blendas ternárias biodegradáveis a partir de poli(ácido lático), poli(álcool vinílico) e quitosana
(Universidade Federal de São Carlos, 2010-04-08)
The present study examined the use of poly(vinyl alcohol) as a compatibilizing agent between chitosan and PLA and as a diluent for chitosan in an approach where a dispersion chitosan in PVA produced by solution blending ...
Grau de cisão de cadeia na degradação termomecânica de polímeros sob multiplas extrusões
(Universidade Federal de São Carlos, 2004-09-14)
One of the ways to follow the polymer degradation has been to calculate the average number of chain scissions (ns) that occurred during its
thermomechanical history. The average can be extended for each molecular weight ...
Estudo da tenacidade à fratura por meio do método do trabalho essencial de fratura (EWF) da blenda PBT/ABS, reforçada com fibra de vidro
(Universidade Federal de São Carlos, 2008-06-05)
High rubber content acrylonitrile-butadiene-styrene terpolymer (ABS) has been used to tough PBT. As a result, super tough PBT/ABS blends under notched Izod impact have been obtained. However, there has been a significant ...
Avaliação de sistema estabilizante para cobertura de cabos aéreos em XLPE.
(Universidade Federal de São Carlos, 2005-08-03)
Overhead energy lines with covered conductors are increasingly used in the 15 kV distribution systems in Brazil. The advantages are, among others, reduced distances between phases, no disruptions due to conductor ...
Utilização de concentrados de eva-argila organofílica obtidos por spray drying, drais e extrusão no desenvolvimento de nanocompósitos poliméricos
(Universidade Federal de São Carlos, 2014-12-15)
The objective of this work was the development of polymer
nanocomposites with montmorillonite organoclays (OMMT) using EVA-OMMT
concentrated obtained by spray drying, Drais and extrusion, making the
characterization and ...
Caracterização experimental e simulação computacional das deformações induzidas na fusão e cristalização do PTFE
(Universidade Federal de São Carlos, 2016-03-07)
Polytetrafluoroethylene (PTFE) has excellent properties such as chemical inertness
and useful mechanical properties at high and low temperatures. After melt,
the PTFE viscosity is so high that the extrusion and injection ...