Buscar
Mostrando ítems 141-150 de 168
Desempenho de filmes soprados multicamada de blendas de polipropileno e copolímeros de etileno
(Universidade Federal de São Carlos, 2012-08-30)
Polypropylene (PP) and polyethylene (PE) are widely used in the flexible packaging market individually as mono or multilayer films. Blending PP and PE in coextruded films has shown limited commercial applications due to ...
Sistemas nanoestruturados condutores baseados em nanocompósitos poliméricos condutores e mantas eletrofiadas condutoras
(Universidade Federal de São Carlos, 2013-05-10)
In this work its was investigated the influence of the processing on the electrical and dielectric properties of nanostructured polymeric systems obtained by differents techniques. The morphology and structure of the ...
Deformação em canal angular de uma liga Al-4%Cu: efeito dos mecanismos de endurecimento na resistência mecânica e ductilidade
(Universidade Federal de São Carlos, 2011-03-03)
Internal boundaries hardening and precipitation hardening are two important mechanisms acting in metallic alloys. The former has special relevance when the grain size is reduced ...
Effect of structural singularities on superwettability of SiO₂-based coatings
(Universidade Federal de São Carlos, 2019-11-07)
A detailed study on the correlation between structural singularities and wettability of neat and chemically modified coatings prepared from layer-by-layer (LbL) assembled silica nanoparticles (SiO₂) was performed. ...
Estudo sistemático da condutividade iônica de vitrocerâmicas NASICON: influência de tratamentos isotérmicos e novas substituições iônicas
(Universidade Federal de São Carlos, 2020-09-24)
The synthesis of solid electrolytes and the optimization of their ionic conductivity are topics of scientific interest since these components are essential for the current density and the half-life of the sodium batteries. ...
Influence of surface treatments on corrosion resistance properties of ultrafine grained titanium alloys for biomedical applications
(Universidade Federal de São Carlos, 2019-08-09)
Titanium and its alloys are used as biomaterials because their excellent combination of high corrosion resistance, low modulus of elasticity and biocompatibility. However, titanium and its alloys cannot meet all the clinical ...
Selective laser melting of a biocompatible Ti-35Nb-7Zr-5Ta alloy
(Universidade Federal de São Carlos, 2019-08-12)
Neste trabalho, estudou-se uma nova rota de fabricação de peças de uma liga biocompatível. Assim, uma liga Ti-35Nb-7Zr-5Ta (% em peso) biocompatível foi processada por fusão seletiva a laser (FSL). Os principais parâmetros ...
Estudo da indução da grafitização da resina fenólica fenol/formaldeído
(Universidade Federal de São Carlos, 2019-08-14)
Among the probable carbon sources, there are the polymers, as the phenolic resin, which produces residual carbon around 60% wt./wt. after thermal treatment. It is classified as non-graphitizable, because it has not graphitic ...
Cerâmicas refratárias macroporosas derivadas de espumas ultraestáveis estabilizadas com partículas cerâmicas
(Universidade Federal de São Carlos, 2020-11-03)
Innovation on materials for heat conservation in high-temperature industrial
processes is seen as an important strategy for Energy Efficiency. Fundamental
studies can support the development of these materials and the ...
Conductive polymers derived heteroatom doped carbon catalysts for oxygen reduction reaction
(Universidade Federal de São Carlos, 2020-12-02)
Fuel cell is an electrochemical energy conversion system, that holds the
promise for clean and sustainable energy source. During the operation, this
device generates electricity direct from electrochemical reactions ...