Buscar
Itens para a visualização no momento 1-10 of 87
Desenvolvimento de vitrocerâmicos transparentes resistentes ao impacto
(Universidade Federal de São Carlos, 2021-11-11)
Transparent glass-ceramics (GCs) can replace glasses traditionally used as ballistic windows and electronic displays due to their better mechanical properties. This improvement is obtained by the crystallization of phases ...
Desenvolvimento de concreto geopolimérico leve: viabilidade de aplicação no setor da construção civil
(Universidade Federal de São Carlos, 2023-07-28)
Portland cement is the main component of conventional concrete, considered
the second most consuming material in the world, but its manufacture
accentuates the greenhouse effect. Studies show that the production of ...
Computational modeling of rubber multiaxial pressing applied to ceramic materials
(Universidade Federal de São Carlos, 2021-04-07)
Uniaxial and isostatic powder pressing are well known processes. However, disadvantages such as the production of heterogeneous parts or low productivity, respectively, are intrinsic drawbacks. Rubber Multiaxial Pressing ...
Juntas de aço inoxidável super duplex UNS S32760 soldadas por fricção e mistura mecânica (FSW): microestrutura e comportamento de corrosão eletroquímica
(Universidade Federal de São Carlos, 2022-04-29)
In this study, the corrosion resistance of the face and root surface of an AISD UNS S32760 friction stir welded (FSW) joint using optimized parameters was investigated. Microstructural changes were evaluated by MO, SEM and ...
Design, processing, and characterization of high strength precipitation-hardened CrCoNiAlTi high entropy alloys
(Universidade Federal de São Carlos, 2023-03-22)
High Entropy Alloys (HEAs) have been attracting considerable interest in literature. While early studies focused on producing single-phase HEAs, more recent investigations have expanded to multi-phase compositions to take ...
Caracterização de interfaces para aplicações em ultra-alto vácuo através de brasagem dissimilar entre nitreto de boro hexagonal (h-BN), a liga de adição Ag-Cu-Ti e o Mo metálico
(Universidade Federal de São Carlos, 2020-08-14)
This work aimed to evaluate the vacuum brazing of h-BN/Mo systems for fabrication of the BPM (Beam Position Monitor) in synchrotron radiation beam. The h-BN has low surface wettability and is difficult to weld. The materials ...
Design, production and advanced characterization of CoCrFeMnNi-based medium- and high-entropy alloys: understanding the interplay with composition, microstructure, and mechanical properties
(Universidade Federal de São Carlos, 2024-04-12)
Worldwide, a great research effort is being employed in the development of Medium/high entropy alloys (M/HEAs). Among the M/HEAs produced to date, great emphasis is given to the equiatomic Co20Cr20Fe20Mn20Ni20 (at.%) alloy ...
Compósitos de poli(éter imida) com partículas nanoestruturadas de LaNi₅ para armazenamento de hidrogênio
(Universidade Federal de São Carlos, 2023-07-14)
Hydrogen is a promising energy vector for decarbonizing the energy
matrix, but its widespread use requires safe and efficient storage systems. This
study aimed to produce microparticles of polyetherimide with LaNi5 through ...
Development of bio-inspired electromechanical devices based on PBMA-b-(PSS-r-PS) amphiphilic block copolymer
(Universidade Federal de São Carlos, 2024-04-08)
Technological advances in the aerospace, biomedical, and robotics industries stimulate the need for innovative and sustainable devices, such as electromechanical devices (EMDs), which are bio-inspired materials capable of ...
Ligas beta Ti-Nb-Zr(-Ta-Mo) multiprincipais com baixo módulo de elasticidade
(Universidade Federal de São Carlos, 2023-07-25)
The use of Ti-6Al-4V alloy as a biomaterial is more convenient among Ti alloys,
as it is produced on a larger scale due to aeronautical applications. However, it
is known that Ti-6Al-4V alloy can be harmful to the patient’s ...