Buscar
Mostrando ítems 11-20 de 22
Efeito da microadição de oxigênio na estabilidade microestrutural da liga Ti-29Nb-13Ta-4,6Zr processada via deformação plástica severa e envelhecimento
(Universidade Federal de São Carlos, 2021-02-24)
Gum Metal corresponds to a family of β-Ti alloys that are currently receiving great attention due to its outstanding properties such as low elastic modulus, superelasticity, and high tensile strength. These alloys show ...
Avaliação das microestruturas de solidificação e propriedades de aplicação de ligas monotéticas Al-Bi, Al-Bi-Cu e Al-Bi-Zn
(Universidade Federal de São Carlos, 2021-06-16)
Monotectic Al-based ternary alloys can result in a good combination of wear resistance and mechanical strength. While the soft self-lubricating elements contribute to an appropriate wear resistance, modification with third ...
Efeitos de baixos teores de aditivos (TiFe, Fe, TiAl, Nb₂O₅) na cinética de absorção e dessorção de hidrogênio pelo sistema Mg/MgH₂
(Universidade Federal de São Carlos, 2021-08-31)
The hydrogen economy holds great promise in supplying our planet's urgent clean energy needs. The effective and safe hydrogen storage remains a major technological challenge. Thus, the H2 storage in metal hydrides of light ...
Nucleação e crescimento de cristais, difusão e relaxação estrutural em vidros 2Na2O.CaO.3SiO2 e 5BaO.8SiO2
(Universidade Federal de São Carlos, 2021-06-25)
Despite intensive research regarding glass crystallization, there are still flaws in the theories and especially in their application. Aiming to verify the applicability of the classical nucleation theory (CNT) and the ...
Avaliação da anomalia da teoria de nucleação clássica em vidros silicatos
(Universidade Federal de São Carlos, 2021-07-13)
Under some conditions, the Classical Nucleation Theory (CNT) provides a good description of the temperature dependence of the experimental homogeneous nucleation rates in supercooled liquids. Allegedly, however, it strongly ...
Coatings cerâmicos de alta emissividade como soluções energéticas para fornos industriais
(Universidade Federal de São Carlos, 2021-08-30)
Aiming at alternatives to reduce the impacts from the excessive consumption of non-renewable energy sources by the industrial sector, the present work highlights an important technological aspect with the development of ...
Método de controle de trajetória de atuadores ipmc baseados em nafion® utilizando técnica de visão de máquina em ambiente com umidade relativa controlada
(Universidade Federal de São Carlos, 2021-08-13)
Ionomeric polymer-metal composites (IPMC) consist of an electroactive polymeric matrix coated on both sides with a noble metal. When applying an electrical potential difference, the polymeric membrane changes its thickness, ...
Desenvolvimento de ligas de alumínio recicladas contendo a fase primária Al(Fe,TM)Si aproximante de quasicristal: controle da microestrutura visando aplicações tribológicas e mecânicas
(Universidade Federal de São Carlos, 2021-01-19)
Iron is the most common and harmful impurity to the mechanical properties of casting Al-7Si-3Cu alloys, which are widely used in the automotive industry. Due to the economic and environmental advantages of recycling, there ...
Influência de modificações superficiais na resistência à corrosão e na bioatividade da liga beta ti-40nb para aplicações biomédicas
(Universidade Federal de São Carlos, 2021-07-30)
β-titanium (Ti) alloys have great applicability in the biomedical area due to
properties such as low density, high corrosion resistance, low elasticity modulus
(E), and biocompatibility. However, these alloys are not ...
On-line FTIR spectroscopy system for extrusion-based process analysis
(Universidade Federal de São Carlos, 2021-11-11)
Polymer processing is a fundamental key to achieve the desired properties to reach the needs of polymer applications. Thus, it is important to understand how the processing can contribute to material characteristics during ...