Buscar
Itens para a visualização no momento 1-10 of 130
Desenvolvimento de vitrocerâmicos transparentes resistentes ao impacto
(Universidade Federal de São Carlos, 2021-11-11)
Transparent glass-ceramics (GCs) can replace glasses traditionally used as ballistic windows and electronic displays due to their better mechanical properties. This improvement is obtained by the crystallization of phases ...
Computational modeling of rubber multiaxial pressing applied to ceramic materials
(Universidade Federal de São Carlos, 2021-04-07)
Uniaxial and isostatic powder pressing are well known processes. However, disadvantages such as the production of heterogeneous parts or low productivity, respectively, are intrinsic drawbacks. Rubber Multiaxial Pressing ...
Efeito do teor de titânio no endurecimento por precipitação em uma liga à base de Co-Ni e consequências nas propriedades mecânicas
(Universidade Federal de São Carlos, 2021-04-19)
The alloy subject of this study, designated by the Unified Numbering System,
R30035 and internationally known as MP35N®, is a 35 Ni – 33.5 Co – 20.5 Cr – 9.5
Mo alloy with very-high mechanical strength, ductility, and ...
Juntas de aço inoxidável super duplex UNS S32760 soldadas por fricção e mistura mecânica (FSW): microestrutura e comportamento de corrosão eletroquímica
(Universidade Federal de São Carlos, 2022-04-29)
In this study, the corrosion resistance of the face and root surface of an AISD UNS S32760 friction stir welded (FSW) joint using optimized parameters was investigated. Microstructural changes were evaluated by MO, SEM and ...
Reciclagem de embalagens flexíveis multicamadas
(Universidade Federal de São Carlos, 2022-04-29)
Packaging industry is facing an important paradox in flexible plastic packaging for fresh food. While, food waste is avoided using multilayer and multi-material structures with barrier properties, that increase shelf life ...
Estudo da cinética de cristalização não-isotérmica de nanocompósitos de PLA/Haloisita
(Universidade Federal de São Carlos, 2021-08-27)
Poly(lactic acid) (PLA) is a biodegradable and biocompatible thermoplastic obtained from renewable sources and with similar properties when compared with petroleum-based polymers. The inclusion of nanoparticles is an ...
Caracterização de interfaces para aplicações em ultra-alto vácuo através de brasagem dissimilar entre nitreto de boro hexagonal (h-BN), a liga de adição Ag-Cu-Ti e o Mo metálico
(Universidade Federal de São Carlos, 2020-08-14)
This work aimed to evaluate the vacuum brazing of h-BN/Mo systems for fabrication of the BPM (Beam Position Monitor) in synchrotron radiation beam. The h-BN has low surface wettability and is difficult to weld. The materials ...
Soldagem por ponto por fricção das ligas de alumínio 5A06-O/2219-T87: caracterização mecânica e microestrutural
(Universidade Federal de São Carlos, 2022-11-30)
Refill Friction Stir Spot Welding (RFSSW) is a solid-state joining technique for welding dissimilar and similar materials applied to light alloys and thermoplastics. Thus, the purpose of this work was to evaluate the ...
Processamento reativo de blendas de amido termoplástico/poli(butileno succinato) (TPS/PBS)
(Universidade Federal de São Carlos, 2022-08-11)
Thermoplastic starch is a natural and biodegradable polymer. However, it has some disadvantages attributed to its hydrophilic character, low mechanical properties and the phenomenon of retrogradation. These limitations can ...
Tubos em compósito de epóxi reforçado com fibra de vidro produzidos pelo processo de enrolamento filamentar para aplicação na indústria petroquímica
(Universidade Federal de São Carlos, 2021-11-25)
This work is focused on the production and mechanical performance evaluation of filament-wound flat plates and pipes using different composite compositions of three distinct commercial high glass transition epoxy resins ...