Search
Now showing items 1-10 of 45
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...
Microestrutura e propriedades mecânicas de vitrocerâmicos do sistema Li2O – CaO – SiO2
(Universidade Federal de São Carlos, 2013-03-12)
An interesting characteristic of the Li2O-CaO-SiO2 glass-forming system is the possibility of obtaining certain crystalline phases and morphologies that may lead to tough glass-ceramics. However, very few published works ...
Influência da microestrutura na resistência mecânica de ligas hipereutéticas Al-Si solidificadas direcionalmente
(Universidade Federal de São Carlos, 2017-01-18)
The present research work deals with directional solidification (DS) of Al-15wt.% and 18wt.% Si alloys and further characterization of the related microstructures. Emphasis is given on the eutectic growth being affected ...
Evolução microestrutural e propriedades mecânicas decorrentes da solidificação das ligas Al-11%Si-xCu
(Universidade Federal de São Carlos, 2018-11-21)
Al-Si-Cu ternary alloys are highly used and recommended to produce joints of aluminum alloys using brazing process. Dissimilar joints between these alloys and stainless steels, carbon steels and low alloy steels can also ...
Deformação em canal angular de uma liga Al-4%Cu : efeito dos mecanismos de endurecimento na resistência mecânica e ductilidade
(Universidade Federal de São Carlos, 2011-03-03)
Internal boundaries hardening and precipitation hardening are two important mechanisms acting in metallic alloys. The former has special relevance when the grain size is reduced ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Correlações entre propriedades dinâmico-mecânicas e durabilidade sob fadiga mecânica em compósitos de polipropileno/polipropileno maleificado/fibra de vidro
(Universidade Federal de São Carlos, 2006-09-06)
Although the influence of interfacial adhesion on short-term mechanical
performance of fiber-reinforced thermoplastic composites has been well
established, very little published information is available on the influence ...
Correlação entre morfologia, percolação elétrica e propriedades mecânicas de compósitos da blenda PLA/PBS com grafite expandido
(Universidade Federal de São Carlos, 2013-12-06)
In recent years, researchers from industry and universities have focused
their interests in polymer nanocomposites, especially in multifunctional
composites. The composites made from nano expanded graphite ( nGE ) ...
Crescimento super e subcrítico de trincas em vidros e vitrocerâmicos analisado via indentacão
(Universidade Federal de São Carlos, 2012-07-02)
In this dissertation we quantified properties that may better describe the mechanical behaviour of different glasses and glass-ceramics of the Na2O-CaO-SiO2-P2O5 system, based on the Biosilicate®chemical composition developed ...
Análise comparativa de fadiga mecânica em compósitos de polipropileno com talco e com nanoargila
(Universidade Federal de São Carlos, 2010-05-17)
Talc is a well known lamellar mineral filler much used for mechanical reinforcement of polypropylene (PP) composites. Mineral nanoclay is also a lamellar filler that is gaining much interest due to its reinforcement effect ...