Search
Now showing items 1-10 of 36
Caracterização de interfaces para aplicações em ultra-alto vácuo através de brasagem dissimilar entre nitreto de boro hexagonal (h-BN), a liga de adição Ag-Cu-Ti e o Mo metálico
(Universidade Federal de São Carlos, 2020-08-14)
This work aimed to evaluate the vacuum brazing of h-BN/Mo systems for fabrication of the BPM (Beam Position Monitor) in synchrotron radiation beam. The h-BN has low surface wettability and is difficult to weld. The materials ...
Modificação microestrutural da liga de magnésio AZ31 por fricção e mistura a altas velocidades
(Universidade Federal de São Carlos, 2015-07-03)
Due to the current growth in the fossil fuels consumption, there is a great concern about the increase in pollutant emissions. In order to reduce these emissions, research indicates that the decrease in vehicle weight can ...
Caracterização estrutural e monitoramento ótico da cristalização de nanocompósitos de polietileno de alta densidade com partículas de diferentes geometrias durante a moldagem por injeção
(Universidade Federal de São Carlos, 2014-03-06)
The main objectives of this project were to study the morphology, the crystallization
kinetics and to monitor on-line the crystallization during the injection
molding process using an optical system of nanocomposites of ...
Análise do comportamento termomecânico e da evolução microestrutural durante a laminação de tiras a quente de aços C-Mn via DEFORM™ 3D
(Universidade Federal de São Carlos, 2015-02-26)
Improving the steel processing is a major focus of the metallurgical industry because
the need of materials and products with lower weight and more strength,
in addition to increasingly stringent specifications imposed ...
Comportamento em fadiga de hastes femorais para artroplastia de quadril com superfícies modificadas
(Universidade Federal de São Carlos, 2015-07-20)
Nowadays, titanium and its alloys are the materials of choice for the
production of implants for hip arthroplasty, a surgery that aims for the
improvement of the quality of life of patients that bear articular pathologies ...
Mecanismo de solidificação de ligas do sistema Al-Mn-Ce ricas em Al sob diferentes taxas de resfriamento
(Universidade Federal de São Carlos, 2015-07-07)
The aircraft industry search for light weight materials to produce lower density parts for increased energy efficiency of fuels was focused in recent years in searching new alloy systems with high mechanical strength and ...
Soldagem pontual por fricção (FSpW) de poliamida 6
(Universidade Federal de São Carlos, 2015-08-03)
Friction Spot Welding (FSpW) is an innovative technique developed and
patented in 2005 by the Helmholtz Zentrum Geesthacht (HZG) research center
in Germany. FSpW uses the friction between a rotating tool and the ...
Transformações de fase termoelásticas em ligas com memória de forma a base de Cu-Al-Ni
(Universidade Federal de São Carlos, 2016-02-26)
Shape memory alloys (SMA) have some exceptional properties such as the
shape memory effect and the superelasticity. Both are associated with a
martensitic/austenitic phase transformation. Alloys of the system Cu-Al-Ni, ...
Refill Friction Stir Spot Welding: evaluation of the welding of AA2198-T8 sheets and preliminary tool wear investigation
(Universidade Federal de São Carlos, 2019-04-26)
Refill Friction Stir Spot Welding (RFSSW) is an innovative method for joining similar and dissimilar lightweight metallic materials or thermoplastics. This technique has the advantage of issuing energy savings, producing ...
Moagem de alta energia e deformação plástica severa do Mg e do Mg-Fe na síntese de hidretos para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2017-03-04)
Magnesium is a light metal with a relatively low cost. It can form magnesium hydride (MgH2), which is interesting for the safe storage of hydrogen in the solid state, thanks to its high gravimetric capacity of 7.6%. The ...