Search
Now showing items 1-10 of 13
Efeito do teor de titânio no endurecimento por precipitação em uma liga à base de Co-Ni e consequências nas propriedades mecânicas
(Universidade Federal de São Carlos, 2021-04-19)
The alloy subject of this study, designated by the Unified Numbering System,
R30035 and internationally known as MP35N®, is a 35 Ni – 33.5 Co – 20.5 Cr – 9.5
Mo alloy with very-high mechanical strength, ductility, and ...
Caracterização de interfaces para aplicações em ultra-alto vácuo através de brasagem dissimilar entre nitreto de boro hexagonal (h-BN), a liga de adição Ag-Cu-Ti e o Mo metálico
(Universidade Federal de São Carlos, 2020-08-14)
This work aimed to evaluate the vacuum brazing of h-BN/Mo systems for fabrication of the BPM (Beam Position Monitor) in synchrotron radiation beam. The h-BN has low surface wettability and is difficult to weld. The materials ...
Estudo de Ligas Fe-Nb-B Nanocristalinas Eutéticas Ultrafinas e Laser Cladding de Pós Atomizados
(Universidade Federal de São Carlos, 2020-05-20)
Fe-Nb-B alloys have gained much attention in recent years because of the possibility to obtain different constituents in nanostructured composites, amorphous and ultrafine eutectics (scale of 100 nm to 1 μm) alloys depending ...
Ligas multicomponentes do sistema Ti33Cr37V30-xNbx (X: 0, 5, 10 e 15) para armazenamento de hidrogênio
(Universidade Federal de São Carlos, 2021-11-30)
The use of metal hydrides is a competitive alternative to hydrogen storage in liquid or gaseous states. Metallic alloys based on the TiCrV system have attractive hydrogen storage characteristics compared with those of the ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Caracterização microestrutural e mecânica da liga Ti-35Nb-7Zr-5Ta produzida por fusão seletiva à laser
(Universidade Federal de São Carlos, 2020-08-10)
Selective Laser Melting (SLM) is an additive manufacturing technique that
consists of a layer-by-layer fusion of a powder bed by scanning a laser enabling
the production of full density parts accordingly to a 3D CAD model ...
Manufatura aditiva da liga reciclada Al-Fe-Cr-Ti formadora de fase quasicristalina
(Universidade Federal de São Carlos, 2020-02-27)
The precipitation of quasicrystalline phase in an α-Al dendritic matrix provides Al-based alloys with high mechanical and wear resistance, mainly at high temperatures, which are promising for applications as automotive and ...
Refill friction stir spot welding of different thickness Al-Cu alloy using a tool with reduced dimensions for aerospace application
(Universidade Federal de São Carlos, 2020-11-12)
Refill Friction Stir Spot Welding has grown as an interesting alternative to conventional joining techniques in recent years, especially when it comes to high strength aluminum alloys. Although current results show promise, ...
Multilayered refill friction stir spot welding of AA2024 and aluminum foils for electric vehicle battery application
(Universidade Federal de São Carlos, 2020-11-06)
Different processes are currently being used to weld aluminum and copper in a multilayered configuration in battery pouches for the automotive industry. The methods most used are mechanical joint, ultrasonic welding, laser ...
Efeito da adição de Al e C na evolução microestrutural e no comportamento mecânico de aços austeníticos de baixa densidade com alto teor de Mn
(Universidade Federal de São Carlos, 2021-05-20)
Low-density steels are advanced materials that are being developed mainly for the automotive industry to reduce the structural weight of cars. The most common studied compositions comprise FeMnAlC variations, in which both ...