Search
Now showing items 1-10 of 15
Otimização das propriedades mecânicas da liga de alumínio 319 contaminada com ferro
(Universidade Federal de São Carlos, 2019-02-15)
The influence of iron additions (0.6, 0.8, 1.2 and 1.5 wt.%) and heat treatment on the microstructure and tensile properties of the 319-aluminum alloy processed by spray forming and rotary swaging was investigated. The ...
Manufatura aditiva da liga reciclada Al-Fe-Cr-Ti formadora de fase quasicristalina
(Universidade Federal de São Carlos, 2020-02-27)
The precipitation of quasicrystalline phase in an α-Al dendritic matrix provides Al-based alloys with high mechanical and wear resistance, mainly at high temperatures, which are promising for applications as automotive and ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Efeito da adição de Al e C na evolução microestrutural e no comportamento mecânico de aços austeníticos de baixa densidade com alto teor de Mn
(Universidade Federal de São Carlos, 2021-05-20)
Low-density steels are advanced materials that are being developed mainly for the automotive industry to reduce the structural weight of cars. The most common studied compositions comprise FeMnAlC variations, in which both ...
Multilayered refill friction stir spot welding of AA2024 and aluminum foils for electric vehicle battery application
(Universidade Federal de São Carlos, 2020-11-06)
Different processes are currently being used to weld aluminum and copper in a multilayered configuration in battery pouches for the automotive industry. The methods most used are mechanical joint, ultrasonic welding, laser ...
Refill friction stir spot welding of different thickness Al-Cu alloy using a tool with reduced dimensions for aerospace application
(Universidade Federal de São Carlos, 2020-11-12)
Refill Friction Stir Spot Welding has grown as an interesting alternative to conventional joining techniques in recent years, especially when it comes to high strength aluminum alloys. Although current results show promise, ...
Estudo sobre a formação da interface em soldas dissimilares de alumínio e aço galvanizado durante o processo de soldagem por fricção por ponto (RFSSW) com controle por carga
(Universidade Federal de São Carlos, 2022-03-29)
In the current scientific and technological scenario, the increased demand for dissimilar joints aiming a combination of optimized mechanical properties has driven innovations. Based on this, the present project proposes ...
Efeitos de baixos teores de aditivos (TiFe, Fe, TiAl, Nb₂O₅) na cinética de absorção e dessorção de hidrogênio pelo sistema Mg/MgH₂
(Universidade Federal de São Carlos, 2021-08-31)
The hydrogen economy holds great promise in supplying our planet's urgent clean energy needs. The effective and safe hydrogen storage remains a major technological challenge. Thus, the H2 storage in metal hydrides of light ...
Solidificação, desenvolvimento microestrutural, propriedades mecânicas, elétricas e de corrosão de ligas Al-Si(-Ag)
(Universidade Federal de São Carlos, 2021-10-27)
In the last years, the development of new light and efficient systems in electric vehicles (EV) opens up new research opportunities. Besides that, the need for internal combustion engine components with optimized properties ...