Search
Now showing items 1-7 of 7
Blendas de poli(tereftalato de etileno) e poliamida 66 modificadas com sepiolita
(Universidade Federal de São Carlos, 2018-03-02)
Blends of recycled bottle-grade polyethylene terephthalate and virgin polyamide
66 (PET/PA66) with different compositions (75/25, 50/50, 25/75) unfilled and filled
with 5 phr of sepiolite clay (Sep) were investigated. ...
Previsão da contração e da variação dimensional em componentes injetados através de simulação computacional
(Universidade Federal de São Carlos, 2014-07-31)
Both, average linear shrinkage and dimensional variation behavior for injection-molded components influence its final application performance, hence the project overall quality and profit [1]. The use of simulation software ...
Influência do tratamento superficial da nanocarga nas propriedades mecânicas de curta e longa duração de um nanocompósito de PEEK/nHA
(Universidade Federal de São Carlos, 2014-09-15)
In this dissertation the mechanical properties of short and long term of
PEEK/nHA nanocomposites with potential application as orthopedic implants
were studied. The nanohydroxyapatite (nHA) was surface-treated with ...
Trincamento induzido por hidrogênio em aços inoxidáveis supermartensíticos modificados pela ação de boro para aplicação em exploração de petróleo em águas profundas
(Universidade Federal de São Carlos, 2015-09-21)
The oil exploitation and production in deep water involves drilling risers with over 7 km deep. In this condition, the environments found in such wells are too adverse, acting under the exploration and production equipment, ...
Friction riveting of TI-6AL-4V and pultruded glass fiber reinforced thermoset polyester hybrid joints
(Universidade Federal de São Carlos, 2015-12-18)
Friction Riveting is an innovative spot joining technology for metal-polymer
hybrid structures. This MSc thesis provided for the first time in the literature, a
fundamental understanding on the Friction Riveting process ...
Desenvolvimento de polímeros à base de glicerol
(Universidade Federal de São Carlos, 2013-08-05)
Reutilização de fibras de para-aramida como reforço mecânico em poliamida 6,6
(Universidade Federal de São Carlos, 2016-06-09)
Aramid fibers are very known by their excellent combination of tensile strength and elastic modulus with low density. On the other hand, aramids do not melt which difficult the recycling process. This property is an important ...