Search
Now showing items 1-5 of 5
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Análise da influência das condições de mistura por extrusão sobre o comportamento de blendas poliméricas PBT/ABS
(Universidade Federal de São Carlos, 2011-06-09)
At the present work several properties of PBT/ABS blends processed with different extrusion conditions as feed rate, screw speed and profile and die geometry were studied in order to verify how these parameters affect their ...
Estruturação da blenda de PP/PVMS na presença de nanopartículas
(Universidade Federal de São Carlos, 2014-09-26)
Blends technology get by mechanical blend extends the range of polymer properties and makes it possible to fit them for specific applications. The performance and the mechanical properties of immiscible polymer blends are ...
Desenvolvimento e caracterização de nanocompósitos de blendas de PA6/AES compatibilizadas com copolímero acrílico
(Universidade Federal de São Carlos, 2014-03-31)
Toughened polyamide 6 (PA6) nanocomposites were obtained by incorporation of acrylonitrile-EPDM-styrene (AES). As compatibilizing agents was used the copolymer methyl methacrylate-anhydride (MMA-MA). The effect of the ...