Search
Now showing items 1-10 of 11
Estudo e desenvolvimento de blendas ternárias biodegradáveis a partir de poli(ácido lático), poli(álcool vinílico) e quitosana
(Universidade Federal de São Carlos, 2010-04-08)
The present study examined the use of poly(vinyl alcohol) as a compatibilizing agent between chitosan and PLA and as a diluent for chitosan in an approach where a dispersion chitosan in PVA produced by solution blending ...
Caracterização experimental e simulação computacional das deformações induzidas na fusão e cristalização do PTFE
(Universidade Federal de São Carlos, 2016-03-07)
Polytetrafluoroethylene (PTFE) has excellent properties such as chemical inertness
and useful mechanical properties at high and low temperatures. After melt,
the PTFE viscosity is so high that the extrusion and injection ...
Avaliação do reprocessamento de copolímero SAN através de moldagem por injeção
(Universidade Federal de São Carlos, 2011-06-30)
The main objective of this work was to study the reprocessing of copolymer SAN through injection molding and its influence on the mechanical, thermomechanical and optical behavior of that copolymer. Mechanical properties, ...
Durabilidade mecânica de compósitos de polipropileno com reforço híbrido de fibra de coco e talco
(Universidade Federal de São Carlos, 2012-08-13)
The use of natural fibers, as possible alternative reinforcement for synthetic fibers such as glass fibers, in polymer composites meets the requirement for development of new materials with environmentally sustainable ...
Obtenção e caracterização de nanocompósitos de poli(cloreto de vinila): plastisol com argila
(Universidade Federal de São Carlos, 2011-03-03)
This project aims to study the effect of adding nanoparticles in the plastisol of poly(vinyl chloride) microsuspension. The influence of two different types of nanoclay, sodium montmorillonite and organophilic montmorillonite ...
Estudo de blenda polimérica PET/PE aplicado na reciclagem de aparas de filmes multicamadas
(Universidade Federal de São Carlos, 2013-12-18)
The main objective of this work was to analyze the viability of the recycling of post-industrial packaging scraps, compounded by multilayer laminated films of PET-HDPE, for production of polymer blends with good ...
Obtenção de estruturas de nanocompósitos poliméricos híbridos condutores
(Universidade Federal de São Carlos, 2013-03-28)
In this work, hybrid electrical conductive nanocomposites structures with potential to be applied in conductive and electrostatic dissipative devices were obtained. Such structures were produced by combining two types of ...
Durabilidade de polietileno em vinhaça quente e fresca em usina de açúcar e álcool
(Universidade Federal de São Carlos, 2013-12-10)
Geomembranes are polymeric sheets widely used in vinasse ponds to prevent contamination of soil. Long-term durability is expected, since failure can result in environmental impact. Smooth black commercial geomembranes and ...
Modificação química de poli(ácido láctico) com anidrido maleico por processamento reativo
(Universidade Federal de São Carlos, 2014-08-18)
The chemical modification of PLA with maleic anhydride by reactive processing and the extent of reaction and degradation reactions, were studied. Routes of grafting reaction of maleic anhydride in PLA were evaluated. Dicumyl ...
Desenvolvimento de compósitos biodegradáveis a partir de amido termoplástico e fibras vegetais
(Universidade Federal de São Carlos, 2011-09-16)
This project had as main objectives to obtain and to develop new and biodegradable composites from renewable sources using a thermoplastic starch (TPS) matrix reinforced with different amounts of natural fibers, acuri, ...