Search
Now showing items 1-10 of 41
Influência da mistura gasosa e da temperatura no processo de nitrocarbonetação a plasma do aço DIN 100Cr6
(Universidade Federal de São Carlos, 2018-08-10)
The surface treatments of metal alloys allow improving the surface qualities by the deposition of another material or by surface modification, producing coatings. The nitrocarburizing, considered one of the most important ...
Friction surfacing of aluminum alloy 5083-H112 over AA 2024-T3
(Universidade Federal de São Carlos, 2018-03-23)
Friction surfacing (FS) is an advanced solid-state process in surface modification with increasing applications in reclaiming worn parts, hardfacing and corrosion protection. It is considered a derivation of the friction ...
Avaliações e correlações das propriedades reológicas, mecânicas e de cinética de cristalização de polímeros utilizados em processo de impressão 3d por FFF
(Universidade Federal de São Carlos, 2018-09-03)
Recently there has been an interest increase in the additive manufacturing process (AM), Fused Filament Fabrication (FFF) is one of the most commercially important extrusion-based process. The success of this technology ...
Cerâmica de titanato de lantânio e lítio: sistematização de obtenção e crescimento de grão orientado induzido via cristais de aluminato de lantânio
(Universidade Federal de São Carlos, 2018-09-10)
The research based on ionic conductive ceramics is part of the scientific innovation efforts applied to the industry of solid state batteries and sensors, which are fundamental for the development of new, more efficient ...
Blendas de poli(tereftalato de etileno) e poliamida 66 modificadas com sepiolita
(Universidade Federal de São Carlos, 2018-03-02)
Blends of recycled bottle-grade polyethylene terephthalate and virgin polyamide
66 (PET/PA66) with different compositions (75/25, 50/50, 25/75) unfilled and filled
with 5 phr of sepiolite clay (Sep) were investigated. ...
Compatibilização química em compósitos de PLA reforçados com fibras de sisal
(Universidade Federal de São Carlos, 2018-07-13)
Even though poly(lactic acid) (PLA) is fragile under impact and has low toughness, the polymer stands out for its stiffness and high tensile strength. This polymer is an interesting material not only for short-term ...
Nanocompósitos de poliuretano comercial e nanopartículas híbridas de núcleo Fe3O4 funcionalizado com capa orgânica de Poli(1,4-Butanodiol)
(Universidade Federal de São Carlos, 2018-02-23)
The use of inorganic nanoparticles in polymer nanocomposites allows gain in mechanical resistance and new properties. However, the incorporation of organic layer functionalized nanoparticles alters the material’s properties ...
Vitrocerâmicas condutoras de íon lítio com estrutura do tipo Nasicon baseadas no sistema Li1+X CrX (GeY Ti1-Y)2-X (PO4)3
(Universidade Federal de São Carlos, 2018-03-22)
The primary goal of this work is to develop a new NASICON-structured glass-ceramic with high
Li-ion conductivity. Therefore, this work introduces a new series of NASICON-type compositions
based on the Li1+xCrx(GeyTi1-y)2-x(PO4)3 ...
Ligas Sn-Ni: efeitos da taxa de resfriamento e da microestrutura nas propriedades mecânicas de tração
(Universidade Federal de São Carlos, 2018-02-28)
The present investigation examined the microstructural arrangements formed during the transient solidification of the eutectic Sn-0.2wt.%Ni and the hypereutectic Sn-0.5wt.%Ni alloys using two different substrates as mold ...
Desenvolvimento de novas ligas quasicristalinas à base de alumínio
(Universidade Federal de São Carlos, 2018-03-21)
Quasicrystalline phases are known for presenting particular crystallographic characteristics that make them a separate group of solid materials. Most of these phases are Al-based and they form in compositions near complex ...