Search
Now showing items 1-10 of 25
Laminação em atmosfera inerte de ligas à base de magnésio para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2014-08-08)
In recent decades, the use of energy presented strong growth due to the need of supplying the daily energy consumption of approximately seven billion people. To solve this problem, it has been investigated the nature, ...
Highly porous geopolymers: effect of the processing route on the reached properties
(Universidade Federal de São Carlos, 2015-02-10)
Os geopolímeros (polímeros inorgânicos) têm atraído a atenção da academia por várias razões, em particular pelo fato de ser considerado um material sustentável onde subprodutos industriais podem ser utilizados como matéria ...
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário
(Universidade Federal de São Carlos, 2011-10-24)
Mg alloys have attracted attention as potential implant material because of their good mechanical properties, biocompatibility and biodegradation properties. However corrosion of these alloys causes intense release of ...
Simulação computacional, projeto, construção e análise do desempenho de uma matriz para extrusão em canal angular dedicada ao processamento de chapas
(Universidade Federal de São Carlos, 2012-08-29)
The present work describes the design, construction and testing of an equal channel angular pressing (ECAP) die characterized by rectangular cross section channels. The main parameter of the ECAP dies is the geometry of ...
Desenvolvimento de um método para levantamento de tecnologias de materiais empregados no trem de força automotivo (powertrain) a partir de patentes
(Universidade Federal de São Carlos, 2012-05-27)
This research approaches the study from patents of technologies for materials used in power train of motor vehicles, to provide additional information in order to support decision making in this universe, especially in the ...
Ligas metálicas amorfas: um novo método de predição de composição com capacidade de formação de amorfos
(Universidade Federal de São Carlos, 2014-02-21)
This thesis presents the development of a new criterion which can indicate new compositions for amorphous metallic alloys. This new criterion was based on dense packing of spheres combined with the lambda criterion through ...
Dispositivo óptico para medida em tempo real da birrefringência de polímeros durante a extrusão
(Universidade Federal de São Carlos, 2010-03-05)
The main objectives of this project were the development and application of an optical device to measure in real time the flow induced birefringence during the polymer extrusion. The linearly polarized light intensity ...
Caracterização das camadas formadas pela nitretação a plasma de ferro sinterizado
(Universidade Federal de São Carlos, 2012-03-06)
Ion nitriding is a process of thermo-physical-chemical treatment that provides a surface hardening, originated by interstitial diffusion of nitrogen on the ferrous and nonferrous alloys surfaces. Understanding and controlling ...
Influência da nanoargila no envelhecimento higrotérmico de compósitos de polipropileno / PP maleado / fibra de vidro
(Universidade Federal de São Carlos, 2010-05-21)
In short glass fiber (GF) reinforced polypropylene (PP) composites, despite of the chemically inert and non-polar nature of the matrix, the fiber-matrix interfacial integrity may be compromised in a hygrothermal active ...
Caracterização da fabricação e uso de compósitos poliméricos contendo fibras naturais com ênfase no polipropileno/sisal a partir da análise de documentos de patentes
(Universidade Federal de São Carlos, 2012-01-24)
Natural fibers have became important as substitute for synthetic fiber reinforcement and filling in polymer composites, looking for better properties, lower cost and appeal of sustainability. To do so, there are challenges ...