Search
Now showing items 1-10 of 68
Influência dos contornos de grãos nas propriedades elétricas de hematita policristalina modificada com diferentes elementos químicos
(Universidade Federal de São Carlos, 2020-03-13)
The use of molecular hydrogen produced by photoelectrochemical cells is an alternative to fossil fuels, economically and environmentally. Hematite (α-Fe2O3) is a promising candidate to the realization of photoelectrochemical ...
Influência da adição de cério na microestrutura e comportamento de oxidação de aços inoxidáveis Fe-Mn-Si-Cr-Ni com efeito de memória de forma
(Universidade Federal de São Carlos, 2020-01-15)
In this study, the influence of small cerium additions on the microstructure and
oxidation behavior of Fe-Mn-Si-Cr-Ni shape memory stainless steels (SMSSs)
was investigated. The results show that the Ce addition in the ...
Desenvolvimento de biocompósitos de Poli (ácido láctico)/biocargas para impressão 3d de scaffolds para engenharia de tecidos ósseos
(Universidade Federal de São Carlos, 2020-08-11)
As life expectancy increases worldwide, there is an increased need for orthopedic procedures to repair bone defects resulting from trauma. In this context, new surgical procedures and bone repair materials, such as scaffolds ...
Biomimetism of Brazil nutshell (Bertholletia excelsa)
(Universidade Federal de São Carlos, 2020-08-07)
For thousands of years, nature has accumulated countless possibilities for optimized
solutions to engineering problems using limited raw material, room temperature,
aqueous solutions, solar energy and renewable resources. ...
Synthesis and graphitization of phenolic resins for carbon-containing refractory applications
(Universidade Federal de São Carlos, 2020-02-03)
Carbon-containing refractories’ (CCRs) present special chemical and thermomechanical properties, which depend on the presence of carbonaceous phase with a structure similar to those of graphite. However, phenolic resins ...
Estabilidade e habilidade de formação de vidros óxidos
(Universidade Federal de São Carlos, 2020-03-02)
The glass-forming ability (GFA) is a measure of the easiness of vitrification of a liquid during cooling from the liquidus temperature. The GFA is inversely proportional to the critical cooling rate (Rc), whose determination ...
Otimização da condutividade iônica de vitrocerâmicas condutoras por íon sódio: controle microestrutural e busca de novas composições
(Universidade Federal de São Carlos, 2020-04-03)
Sodium-based materials are promising candidates for manufacturing stationary storage devices such as batteries due to their low cost and the Na high redox potential. However, the corrosion, flammability, and the degradation ...
Cerâmicas refratárias macroporosas derivadas de espumas ultraestáveis estabilizadas com partículas cerâmicas
(Universidade Federal de São Carlos, 2020-11-03)
Innovation on materials for heat conservation in high-temperature industrial
processes is seen as an important strategy for Energy Efficiency. Fundamental
studies can support the development of these materials and the ...
Influência da adição de cério na resistência à corrosão e efeito de memória de forma em ligas Fe-Mn-Si-Cr-Ni-(Ce)
(Universidade Federal de São Carlos, 2020-09-03)
The interest in scientific and technological development of Fe-Mn-Si-Cr-Ni shape memory alloys is increasing in the last years. The improvement of key properties of theses alloys should enable its use in different applications, ...
Conductive polymers derived heteroatom doped carbon catalysts for oxygen reduction reaction
(Universidade Federal de São Carlos, 2020-12-02)
Fuel cell is an electrochemical energy conversion system, that holds the
promise for clean and sustainable energy source. During the operation, this
device generates electricity direct from electrochemical reactions ...