Search
Now showing items 1-10 of 12
Otimização das propriedades mecânicas da liga de alumínio 319 contaminada com ferro
(Universidade Federal de São Carlos, 2019-02-15)
The influence of iron additions (0.6, 0.8, 1.2 and 1.5 wt.%) and heat treatment on the microstructure and tensile properties of the 319-aluminum alloy processed by spray forming and rotary swaging was investigated. The ...
Estudo de ligas Ti-Nb-Zr e Ti-Nb-Mg, fundidas e na forma de recobrimentos sobre aço inoxidável, para aplicações biomédicas
(Universidade Federal de São Carlos, 2019-10-31)
In the present thesis, nanostructured coatings of Ti (100 - (20 + z)) -Nb20-Xz alloys (X = Zr and Mg) were produced by sputtering. So with that, it was possible to analyze the effect of the addition of Zr and Mg on the ...
Eletrodeposição de ligas bioabsorvíveis do sistema Fe-Mn
(Universidade Federal de São Carlos, 2019-03-25)
Stents are medical devices which promote the opening and mechanical support of clogged blood vessels and, once applied, cannot be removed. The manufacture of bioabsorbable stents is desirable to avoid several subsequent ...
Caracterização microestrutural e propriedades de desgaste de revestimento de aço inoxidável supermartensítico modificado com boro processado por HVOF
(Universidade Federal de São Carlos, 2019-05-28)
Stainless steels are recognized as good materials to be used in corrosive environments, but their wear resistance does not exhibit good results. Therefore, researches have been developed to increase the wear resistance of ...
Modelagem computacional e análise das propriedades termodinâmicas do líquido super-resfriado do sistema Fe-Nb-B
(Universidade Federal de São Carlos, 2019-04-22)
Amorphous alloys of the Fe-Cr-Nb-B system are promising materials to supply the demand for new pipe coatings of higher wear resistance in the petrochemical industry due to its good abrasion and corrosion resistance properties. ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Amorfização e cristalização da liga fe68cr8mo4nb4b16: caracterização através de técnicas avançadas de microscopia eletrônica
(Universidade Federal de São Carlos, 2019-08-05)
Stainless steels of the different classes can have their composition modified through the addition of boron, aiming to obtain both amorphous phases and the controlled formation of borides. The formation of amorphous phase ...
Desenvolvimento de ligas amorfas e nanocristalinas do sistema Fe-Cr-Ni-B e suas propriedades de corrosão
(Universidade Federal de São Carlos, 2019-02-14)
Fe-Cr-Ni-B system alloys with partially amorphous structures can ensure a very attractive combination of mechanical and electrochemical properties, far superior to conventional materials. It can be used, for example, in ...
Efeito da adição de Ni na microestrutura bainítica de um novo aço para roscas e cilindros de plastificação de polímeros
(Universidade Federal de São Carlos, 2019-09-02)
Nitriding steels, such as DIN 1.8550, are used in the manufacture of screws and barrels for injection molding machines and plastic extruders. The hardening process of DIN 1.8550 occurs via water or oil quenching followed ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...