Buscar
Mostrando ítems 1-10 de 36
Reciclagem química de PET proveniente de filtros industriais pós-consumo
(Universidade Federal de São Carlos, 2006-03-10)
The PET filter bag is used in the separation of the particulates materials of the gas produced in the aluminum industry. It had been submitted a chemical recycling. Almost industries make the disposal of these materials ...
Estudo da influência de íons titânio e cobalto nas propriedades magnéticas e absorvedoras de ondas eletromagnéticas de hexaferrita de bário
(Universidade Federal de São Carlos, 2008-02-22)
In this work Cobalt and Titanium doped Barium hexaferrites were
synthesized by the ceramic method in order to study their use as
electromagnetic absorbing materials in high frequencies. The dopants were
used individually ...
Desenvolvimento do sensor baseado em eletrólito sólido de β-alumina para monitoramento de enxofre na indústria siderúrgica
(Universidade Federal de São Carlos, 2007-10-26)
Electrochemical sensors provide real time information of chemical
compositions of molten metal. They can be used to improve the control of
various metallurgical processes. One of the most successful and widely ...
Caracterização e avaliação de filmes metálicos para uso em ultra-alto vácuo
(Universidade Federal de São Carlos, 2007-11-27)
The construction of ultra-high vacuum chambers (UHV) for particle accelerators demands pressure in the range of 10-8 Pa, and this is particularly difficult to achieve in chambers with the length to traverse section rate ...
Efeito da porosidade sobre o manchamento de porcelanato polido
(Universidade Federal de São Carlos, 2009-12-15)
Porcelain tile is a type of ceramic tile which has shown the highest worldwide expansion in recent years due to the excellent technical and esthetic qualities of the product, which have augmented the possibilities of its ...
Estudo da tenacidade à fratura por meio do método do trabalho essencial de fratura (EWF) da blenda PBT/ABS, reforçada com fibra de vidro
(Universidade Federal de São Carlos, 2008-06-05)
High rubber content acrylonitrile-butadiene-styrene terpolymer (ABS) has been used to tough PBT. As a result, super tough PBT/ABS blends under notched Izod impact have been obtained. However, there has been a significant ...
Microestrutura e propriedades mecânicas de ligas Al-Si hipoeutéticas conformadas por spray.
(Universidade Federal de São Carlos, 2005-06-29)
The aims of this work were the microstructural and tensile properties
characterization of the hypoeutectic spray formed Al-Si 319 and 380 alloys. The
alloys were melted by induction furnace, gas atomized with nitrogen ...
Estudo da transição de fase sólido-vapor e da eficiência de inibidores voláteis de corrosão quando incorporados em matrizes poliméricas
(Universidade Federal de São Carlos, 2005-08-05)
In this work it is proposed a potential barrier model between solid and vapor phases. As a consequence of this model it is developed a method to measure vapor pressure as low as 10-5 Pa. A thermodynamic system consisting ...
Análise da processabilidade de blendas PBT/ABS compatibilizadas in situ com copolímeros acrílicos
(Universidade Federal de São Carlos, 2007-12-14)
Poly(butylene terephthalate)/acrylonitrile-butadiene-styrene (PBT/ABS) blends show high toughness at room temperature, low ductile-brittle transition temperature and stable morphology when compatibilized. The flowability ...
Cristalização e sinterização de bio vidros do sistema Na2O-CaO-SiO2-P2O5
(Universidade Federal de São Carlos, 2001-03-30)
The objective of this work was to study crystallisation and sintering of Bio-glasses of Na2O CaO SiO2 P2O5 aiming at the improvement of the mechanical properties. In order to study the development of glass-ceramics in this ...