Search
Now showing items 1-10 of 14
Compatibilização química em compósitos de PLA reforçados com fibras de sisal
(Universidade Federal de São Carlos, 2018-07-13)
Even though poly(lactic acid) (PLA) is fragile under impact and has low toughness, the polymer stands out for its stiffness and high tensile strength. This polymer is an interesting material not only for short-term ...
Ligas Sn-Ni: efeitos da taxa de resfriamento e da microestrutura nas propriedades mecânicas de tração
(Universidade Federal de São Carlos, 2018-02-28)
The present investigation examined the microstructural arrangements formed during the transient solidification of the eutectic Sn-0.2wt.%Ni and the hypereutectic Sn-0.5wt.%Ni alloys using two different substrates as mold ...
Desenvolvimento de novas ligas quasicristalinas à base de alumínio
(Universidade Federal de São Carlos, 2018-03-21)
Quasicrystalline phases are known for presenting particular crystallographic characteristics that make them a separate group of solid materials. Most of these phases are Al-based and they form in compositions near complex ...
Fabricação de amostras maciças da liga Fe-Co-B-Si-Nb com estrutura amorfa pela rota de atomização e extrusão a quente
(Universidade Federal de São Carlos, 2018-08-23)
Metallic glasses alloys are a relatively new class of materials characterized by the absence of structural long-range order. During heating, these alloys exhibit a glass transition at a temperature (Tg) before reaching the ...
Desenvolvimento de Nanoblendas PLA/EVOH biodegradáveis com características de barreira a gases e vapores
(Universidade Federal de São Carlos, 2018-07-20)
Poly (lactic acid) (PLA) is a non-toxic, transparent and biodegradable aliphatic polyester, produced from renewable raw materials. This polymer meets several requirements for packaging applications, but is fragile and has ...
Estudo da viabilidade técnica do reaproveitamento de altos teores de fibras de poli(para-aramida) como reforço mecânico em poliamida 66
(Universidade Federal de São Carlos, 2018-10-26)
Responsible for an annual demand higher than 70 millions of tons, the poly(para- aramide) fibers are being widely used in the safety, automobilist, aeronautic, and petroleum industries, due to their attractive mechanical, ...
Graftização de polipropileno-G-anidrido maleico sobre microesferas ocas de vidro por extrusão reativa
(Universidade Federal de São Carlos, 2018-08-24)
Using a maleic grafted polypropylene copolymer as a compatibilizing agent on a composite with hollow glass microspheres HGM is one way to reduce the mechanical properties decrement associated to the round, hollow, hydrophilic ...
Modificação química de poli(ácido láctico) com monômeros vinílicos, por processamento reativo, visando ajuste molecular e sua utilização em blendas poliméricas
(Universidade Federal de São Carlos, 2018-09-24)
Poly(lactic acid) (PLA) was modified with maleic anhydride (MA) or glycidyl methacrylate (GMA) in the presence of peroxide to assess the physical and chemical changes of the polymer during the reactive processing. Chemical ...
Estudo de microscopia eletrônica de transmissão in situ de nanoestrutura de óxidos mistos em altas temperaturas
(Universidade Federal de São Carlos, 2018-09-19)
This work addresses the characterization of the high temperature reactions between different nanoparticles oxides, CeO2-ZrO2 and CeO2-SnO2, by the direct observation of the phenomenon by in situ Transmission Electron ...
Blendas de amido termoplástico e PBAT processadas com auxílio da pulverização por cisalhamento no estado sólido
(Universidade Federal de São Carlos, 2018-02-07)
The use of biodegradable materials arise as a potential alternative for reducing environmental polution. For being found in abundance, low cost, biodegradable and provided from renewable source, starch has been a ...