Search
Now showing items 1-10 of 13
Estudo da indução da grafitização da resina fenólica fenol/formaldeído
(Universidade Federal de São Carlos, 2019-08-14)
Among the probable carbon sources, there are the polymers, as the phenolic resin, which produces residual carbon around 60% wt./wt. after thermal treatment. It is classified as non-graphitizable, because it has not graphitic ...
O efeito dos tratamentos térmicos na microestrutura e nas propriedades mecânicas de rodas automotivas fundidas a baixa pressão na liga A356
(Universidade Federal de São Carlos, 2019-12-13)
The low-pressure die casting process to produce automotive aluminum alloy wheels is well known, and, in the last decades, has been consolidated as the most common way to produce light automotive wheels in large scale. The ...
Avaliação do comportamento reológico, térmico e mecânico de misturas de PBAT com elevados teores de lignina
(Universidade Federal de São Carlos, 2019-12-17)
The massive accumulation of plastic waste and its environmental impact is in great evidence today. Each year, more than 8 million tons end up in the oceans, so research indicates that there will be more plastics than fishs ...
Microestrutura, resistência mecânica e corrosão sob tensão em ligas de alumínio Al-0,3%Fe e Al-4%Cu processadas por extrusão em canal angular
(Universidade Federal de São Carlos, 2019-04-29)
Grain refinement is an important hardening mechanism in metallic alloys, notably when the grain size reaches the submicrometer scale. For this purpose, several techniques of Severe Plastic Deformation (SPD) have been ...
Contribuição para a melhoria no desempenho ambiental de porcelanatos: Avaliação de Ciclo de Vida (ACV) e o uso de fundentes enérgicos
(Universidade Federal de São Carlos, 2019-08-01)
Whether due to growing environmental awareness or legal and market requirements, the quest for sustainable development has leading to the need to improve processes and products. In this scenario, the general objective of ...
Estudo da incorporação de nanopartículas de óxido de zinco e pentóxido de nióbio em polietileno linear de baixa densidade
(Universidade Federal de São Carlos, 2019-03-29)
Linear low-density polyethylene (LLDPE) is one of the most widely used materials in greenhouse covering, due to its low cost and transparency to photosynthetically active radiation up to 80%. However, this polymer also ...
Implementação do sistema de cristalização superficial induzida por laser em vidro de composição eutética
(Universidade Federal de São Carlos, 2019-03-01)
The radiation from lasers has been successfully applied to materials
processing such as drilling, cutting and welding, sintering of ceramic oxides,
surface heat treatment, directional solidification of single crystal ...
Influence of surface treatments on corrosion resistance properties of ultrafine grained titanium alloys for biomedical applications
(Universidade Federal de São Carlos, 2019-08-09)
Titanium and its alloys are used as biomaterials because their excellent combination of high corrosion resistance, low modulus of elasticity and biocompatibility. However, titanium and its alloys cannot meet all the clinical ...
Influência da taxa de resfriamento no módulo de elasticidade de ligas beta Ti e obtenção de diagramas CCT
(Universidade Federal de São Carlos, 2019-07-31)
The metallic alloys used as orthopedic implants, such as the Ti-6Al-4V, present some problems of biological and mechanical compatibility. In addition, the great difference between the elastic modulus of human bone and the ...
Synthesis and characterization of Biosilicate/F18 bioglass scaffolds for dental application
(Universidade Federal de São Carlos, 2019-10-16)
In this work, Biosilicate scaffolds were synthesized using the foam replica technique. Biosilicate is highly bioactive, biodegradable, antibacterial, and non-toxic. Despite of these properties, Biosilicate scaffolds present ...