Search
Now showing items 1-10 of 18
Sinterização por micro-ondas em uma e em duas etapas de varistores à base de ZnO
(Universidade Federal de São Carlos, 2013-09-30)
This thesis is aimed at one-step microwave sintering at frequencies of 2.45 GHz and 30 GHz and the development of two-step microwave sintering (MW-TSS) at 2.45 GHz of ZnO-based nanostructured semiconductor compositions for ...
Concretos refratários nanoligados para aplicação em unidades de craqueamento catalítico
(Universidade Federal de São Carlos, 2013-09-24)
In the petrochemical industry gasoline and LPG are produced in the fluid catalytic cracking unit (FCCU). The cracking occurs by the contact of crude oil with fluidized fine particles of a ceramic catalyst. The process ...
O uso de um vidro altamente bioativo para conferir bioatividade à superfície do titânio: desenvolvimento de um método para recobrimentos descontínuos
(Universidade Federal de São Carlos, 2013-03-15)
Bioactive glasses - or glass-ceramics, exhibit the largest known bioactivity index due to their osteoinductive property - among others. Theirs bonding to bone is also one of the strongest known, but they have poor mechanical ...
Sistemas nanoestruturados condutores baseados em nanocompósitos poliméricos condutores e mantas eletrofiadas condutoras
(Universidade Federal de São Carlos, 2013-05-10)
In this work its was investigated the influence of the processing on the electrical and dielectric properties of nanostructured polymeric systems obtained by differents techniques. The morphology and structure of the ...
Desenvolvimento da microestrutura do BaCeO3 dopado com ítrio sob a influência do ZnO como aditivo de sinterização: correlação com a condutividade protônica
(Universidade Federal de São Carlos, 2013-12-13)
Yttrium-doped barium cerate perovskites are promising electrolyte for solid oxide fuel cell (SOFC) due to high proton conductivity at intermediate temperature, 400-600°C. However, the proton conductivity is not an intrinsic ...
Efeito da precipitação de fase secundária na resistência à corrosão da superliga UNS N26455
(Universidade Federal de São Carlos, 2013-10-18)
The UNS N26455 is a superalloy of the Ni-Cr-Mo system used on offshore platforms as components of injection pumps. This alloy has low-carbon content and high levels of Cr and Mo. This composition gives the material high ...
Propriedades de armazenagem de hidrogênio de materiais à base de magnésio e ferro preparados por moagem de alta energia e técnicas de deformação plástica severa
(Universidade Federal de São Carlos, 2013-05-24)
In the doctoral research, the hydrogen storage properties of magnesiumiron based materials prepared by high energy ball milling and techniques of severe plastic deformation were studied. The materials were processed by ...
Argamassa para revestimento com propriedades termoacústicas, produzida a partir de vermiculita expandida e borracha reciclada de pneus
(Universidade Federal de São Carlos, 2013-12-19)
Light weight masonry mortars containing vermiculite are commonly used when one wants thermal and acoustic insulation. This Thesis investigated the incorporation of recycled used tires rubber crumbs as light weight mortar ...
Estudo da aplicação da técnica de Trabalho Essencial da Fratura (EWF) na análise da tenacidade à fratura de sistemas poliméricos
(Universidade Federal de São Carlos, 2013-12-20)
Polymeric materials, including polymer blends and composites are used in a great variety of engineering applications. Toughness, which is associated to the capacity of the material to absorb energy before its break, is ...
Efeito da geometria e da rigidez do projeto da prótese de quadril no estímulo ao remodelamento ósseo
(Universidade Federal de São Carlos, 2013-12-16)
The stress shielding phenomenon, resulting from the large difference between materials usually employed in prosthesis and the femur Young modulus, promotes significant bone mineral density loss, which originates several ...