Search
Now showing items 1-7 of 7
Modificação do Poli(hidroxibutirato) PHB com nucleantes e com o copolímero (etileno-co-acetato de vinila) - EVA
(Universidade Federal de São Carlos, 2008-03-19)
In this work, we sought to modify PHB, processing it in the melted state, and to
evaluate the effect of the modifications on its mechanical properties and
biodegradation characteristics. The following systems were therefore ...
Influência da incorporação de poli(ácido lático) - PLA, de pó de madeira e outros aditivos no comportamento físico-mecânico do poli(hidroxibutirato) - PHB.
(Universidade Federal de São Carlos, 2004-04-30)
Polymeric materials are used today in the most varied sectors and the deleterious effects of their application, particularly in the short-term, have led to increasing environmental concern. On the other hand, innovative ...
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Análise da processabilidade de blendas PBT/ABS compatibilizadas in situ com copolímeros acrílicos
(Universidade Federal de São Carlos, 2007-12-14)
Poly(butylene terephthalate)/acrylonitrile-butadiene-styrene (PBT/ABS) blends show high toughness at room temperature, low ductile-brittle transition temperature and stable morphology when compatibilized. The flowability ...
Estudos microrreológicos da blenda PBT/SAN.
(Universidade Federal de São Carlos, 2006-09-22)
This work was motivated by the need of a better understanding of the
microrheological characteristics of polybutylene terephthalate, PBT, polymer
blends, such as the matrix phase PBT and the styrene-acrylonitrile, SAN
copolymer ...
Desenvolvimento de blendas poliméricas PVC/NBR através de processamento reativo e vulcanização dinâmica in situ
(Universidade Federal de São Carlos, 2008-02-28)
Dynamic vulcanization is a process of vulcanization of an elastomer during melt mixing with a thermoplastic which results in a material with better chemical and mechanical properties at high temperature. The PVC/NBR blends ...