Buscar
Mostrando ítems 1-10 de 10
Monitoramento em tempo real da morfologia na extrusão da blenda polimérica polipropileno/ nylon 6.
(Universidade Federal de São Carlos, 2006-09-01)
The aim of this work is to assess in real time the morphological
parameters of polypropylene and polyamide 6 blends during the extrusion
process. An optical detector based on the visible light transmitted and extinction
principle ...
Modificação do Poli(hidroxibutirato) PHB com nucleantes e com o copolímero (etileno-co-acetato de vinila) - EVA
(Universidade Federal de São Carlos, 2008-03-19)
In this work, we sought to modify PHB, processing it in the melted state, and to
evaluate the effect of the modifications on its mechanical properties and
biodegradation characteristics. The following systems were therefore ...
Desenvolvimento de um detector de espalhamento de luz LASER de baixo ângulo LALLS operando em tempo real na extrusão
(Universidade Federal de São Carlos, 2005-12-08)
In the present work a prototype of a low angle laser light scattering was developed and installed in an extruder in order to operate in real time. The equipment was built by the research group of which the author is member, ...
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Estudo e desenvolvimento de blendas ternárias biodegradáveis a partir de poli(ácido lático), poli(álcool vinílico) e quitosana
(Universidade Federal de São Carlos, 2010-04-08)
The present study examined the use of poly(vinyl alcohol) as a compatibilizing agent between chitosan and PLA and as a diluent for chitosan in an approach where a dispersion chitosan in PVA produced by solution blending ...
Caracterização de poli(hexametileno biguanida) e suas blendas com poli(álcool vinílico)
(Universidade Federal de São Carlos, 2012-07-31)
In this study, the physical-chemical characterization of poly(hexamethylene biguanide) hydrochloride, PHMB, was performed. It is a low molecular weight synthetic polymer with a broad-spectrum biocidal activity, widely used ...
Blendas de PHBV e PCL para uso em dispositivos de osteossíntese
(Universidade Federal de São Carlos, 2010-12-15)
This study aimed to develop and characterize polymer blends using biodegradable and bioabsorbable polymers poly (hydroxybutyrate-co-valerate) PHBV with 12% valerate, and poly (ε-caprolactone) PCL, in order to make ...
Estudo de blenda polimérica PET/PE aplicado na reciclagem de aparas de filmes multicamadas
(Universidade Federal de São Carlos, 2013-12-18)
The main objective of this work was to analyze the viability of the recycling of post-industrial packaging scraps, compounded by multilayer laminated films of PET-HDPE, for production of polymer blends with good ...
Desenvolvimento de nanoblendas poliméricas PMMA/SAN
(Universidade Federal de São Carlos, 2012-08-03)
The motivation for this work was the idea that nanoblends are fundamentally dependent on the high interaction between the phases in the mixture. The strategy adopted in this study was based on the use of two polymers that ...