Search
Now showing items 1-6 of 6
Avaliação do comportamento mecânico de nanocompósito de PEEK/nHA sob curta e longa duração para aplicação como biomaterial
(Universidade Federal de São Carlos, 2012-04-27)
The main objectives of this dissertation were to study the short (tensile and impact) and long-term (fatigue) mechanical behavior of nanocomposites of poly(ether-ether-ketone), PEEK, with nanohydroxyapatite, nHA, for ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Comportamento mecânico em fadiga da liga de titânio beta metaestável Ti-5553
(Universidade Federal de São Carlos, 2016-10-14)
The microstructure of metastable beta Ti alloys is a decisive factor that
governs their properties and, therefore, the assessment of the relation between
the microstructure and the fatigue response means an advance in ...
Comportamento mecânico sob fadiga de compósitos de polipropileno com reforço híbrido de fibras e microesferas ocas de vidro
(Universidade Federal de São Carlos, 2018-02-05)
Short glass fiber (GF) reinforced polypropylene (PP) composites can be hybridized with hollow glass beads (HGB) in order to minimize the adverse effects arising from the preferential fiber orientation in injection molded ...
Estudo das propriedades mecânicas de cabos condutores elétricos de tipo CAA usados e sua adequação ao retracionamento.
(Universidade Federal de São Carlos, 2005-10-24)