Search
Now showing items 1-9 of 9
Influência das condições de processamento na morfologia e das propriedades mecânicas de sistemas poliméricos moldados por injeção e sua predição através de redes neurais artificiais.
(Universidade Federal de São Carlos, 2004-08-12)
The influence of the injection molding parameters on the morphology and mechanical properties of poly(phenylene sulfide), PPS, and of a 80/20(%wt) blend of PPS/block copolymer styrene-ethylene-butylene-styrene ,SEBS, ...
Estudo das propriedades mecânicas de cabos condutores elétricos de tipo CAA usados e sua adequação ao retracionamento.
(Universidade Federal de São Carlos, 2005-10-24)
Influência da compatibilização interfacial seletiva nas propriedades mecânicas de compósitos híbridos ternários de PET/fibra de vidro/elastômeros olefínicos reativos
(Universidade Federal de São Carlos, 2009-09-25)
Poly(ethylene terephthalate) (PET) is a semi-crystalline thermoplastic widely used for packaging of aereted soft drinks, which makes the recycling of post-consumer PET material necessary to prevent the negative environmental ...
Avaliação de um critério de equivalência entre dados de tração a quente e fluência em aços
(Universidade Federal de São Carlos, 2007-05-28)
This work was conducted in four stages, the first to understand the phenomena that affect the 2.25Cr-1Mo steel hot tensile in different conditions, observing their behavior in a wide range of temperature and strain rates, ...
Propriedades mecânicas de tração e impacto dos aços inoxidáveis CA15 e CA6NM
(Universidade Federal de São Carlos, 2007-02-27)
The subject of this work was to study the mechanical properties, based in tensile and impact tests, of two stainless martensitic steels cast under designations of ASTM Standards, namely the CA15 steel, a steel with 12% of ...
Processamento, caracterização microestrutural e avaliação das propriedades mecanicas da liga Al92Fe3Cr2Mn3
(Universidade Federal de São Carlos, 2008-09-08)
Aluminum alloys having a particle dispersion in nanometric scale, which present elevated values of mechanical strength at both ambient and high temperatures have been studied for some time. These alloys are known for ...
Avaliação da qualidade final de juntas dissimilares de ligas de alumínio 2024-6056 e 7075-6056 soldadas por FSW - friction stir welding
(Universidade Federal de São Carlos, 2006-03-31)
The aeronautic industry has been studying the FSW (Friction Stir Welding) process since its development by TWI (The Welding Institute), in 1991. Nowadays it has been used in the airplanes fuselage of the Eclipse Aviation ...
Microestrutura e propriedades mecânicas de ligas Al-Si hipoeutéticas conformadas por spray.
(Universidade Federal de São Carlos, 2005-06-29)
The aims of this work were the microstructural and tensile properties
characterization of the hypoeutectic spray formed Al-Si 319 and 380 alloys. The
alloys were melted by induction furnace, gas atomized with nitrogen ...
Correlações entre propriedades dinâmico-mecânicas e durabilidade sob fadiga mecânica em compósitos de polipropileno/polipropileno maleificado/fibra de vidro
(Universidade Federal de São Carlos, 2006-09-06)
Although the influence of interfacial adhesion on short-term mechanical
performance of fiber-reinforced thermoplastic composites has been well
established, very little published information is available on the influence ...