Search
Now showing items 1-7 of 7
Design, production and advanced characterization of CoCrFeMnNi-based medium- and high-entropy alloys: understanding the interplay with composition, microstructure, and mechanical properties
(Universidade Federal de São Carlos, 2024-04-12)
Worldwide, a great research effort is being employed in the development of Medium/high entropy alloys (M/HEAs). Among the M/HEAs produced to date, great emphasis is given to the equiatomic Co20Cr20Fe20Mn20Ni20 (at.%) alloy ...
Estabilidade microestrutural da liga Cu-0,8Cr-0,07Zr após extrusão em canal angular em temperatura criogênica
(Universidade Federal de São Carlos, 2021-12-20)
Severe Plastic Deformation (SPD) are well established routes with regard to the
intense microstructural refining of metals and alloys up to the submicrometer (<
1 μm) and/or nanometer (< 100 nm) scales. Lowering the ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, 2021-02-19)
In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ...
Microestrutura e propriedades mecânicas da liga Al7SiMg contaminada com 2,8%Fe e processada por fusão seletiva a laser
(Universidade Federal de São Carlos, 2022-06-28)
The solidification kinetics imposed by Selective Laser Melting (SLM) leads the microstructure of the manufactured metallic components to present intrinsic characteristics such as: microstructural and phase refinement, ...