Buscar
Itens para a visualização no momento 1-10 of 10
Estudo da solidificação do aço rápido M2 em diferentes lingotes e seus efeitos na microestrutura e propriedades mecânicas finais
(Universidade Federal de São Carlos, 2011-08-03)
The high speed steels are mostly applied in cutting tools, like drills, cores and top milling cutter. Its microstructure is composed by martensite, with high hardness, strong tempering resistance and disperses carbides on ...
Avaliação da qualidade final de juntas dissimilares de ligas de alumínio 2024-6056 e 7075-6056 soldadas por FSW - friction stir welding
(Universidade Federal de São Carlos, 2006-03-31)
The aeronautic industry has been studying the FSW (Friction Stir Welding) process since its development by TWI (The Welding Institute), in 1991. Nowadays it has been used in the airplanes fuselage of the Eclipse Aviation ...
Microestrutura e propriedades mecânicas de ligas Al-Si hipoeutéticas conformadas por spray.
(Universidade Federal de São Carlos, 2005-06-29)
The aims of this work were the microstructural and tensile properties
characterization of the hypoeutectic spray formed Al-Si 319 and 380 alloys. The
alloys were melted by induction furnace, gas atomized with nitrogen ...
Estudo do processo de soldagem a ponto por fricção de juntas dissimilares entre ligas de alumínio e titânio
(Universidade Federal de São Carlos, 2016-12-09)
Multimaterial structures between aluminum and titanium alloys are a
technologically attractive field of research and their increasing use in the
transportation sector for weight and emission reduction is part of the ...
Microestrutura e propriedades mecânicas de vitrocerâmicos do sistema Li2O – CaO – SiO2
(Universidade Federal de São Carlos, 2013-03-12)
An interesting characteristic of the Li2O-CaO-SiO2 glass-forming system is the possibility of obtaining certain crystalline phases and morphologies that may lead to tough glass-ceramics. However, very few published works ...
Influência da microestrutura na resistência mecânica de ligas hipereutéticas Al-Si solidificadas direcionalmente
(Universidade Federal de São Carlos, 2017-01-18)
The present research work deals with directional solidification (DS) of Al-15wt.% and 18wt.% Si alloys and further characterization of the related microstructures. Emphasis is given on the eutectic growth being affected ...
Parâmetros térmicos de solidificação, microestrutura e resistência mecânica de ligas eutéticas Sn-0,7%Cu-(xNi)
(Universidade Federal de São Carlos, 2013-07-29)
Sn-Pb traditional solder alloys were overly utilize in electronic devices industry, since their properties and features use were adequate and well known. In the last years many restrictions and directives were and have ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação direcional de ligas Al-Mg-Fe
(Universidade Federal de São Carlos, 2017-01-18)
Al-Mg-Fe alloys are appointed as favorable ones in respect of the costs involved and all the required properties for successful vessel service. However, experimental inter-relations of solidification thermal parameters, ...
Influence of Bobbin Tool Friction Stir Welding (BT-FSW) variants on the microstructure and properties of AA2060 and AA2196 aluminum alloys
(Universidade Federal de São Carlos, 2020-06-18)
In order to reduce total costs in aircrafts production, operation and maintenance, materials and processing techniques have been continuously further optimized. In this scenario, aluminum-lithium alloys have been studied ...
O efeito dos tratamentos térmicos na microestrutura e nas propriedades mecânicas de rodas automotivas fundidas a baixa pressão na liga A356
(Universidade Federal de São Carlos, 2019-12-13)
The low-pressure die casting process to produce automotive aluminum alloy wheels is well known, and, in the last decades, has been consolidated as the most common way to produce light automotive wheels in large scale. The ...