Buscar
Itens para a visualização no momento 1-10 of 13
Análise comparativa de fadiga mecânica em compósitos de polipropileno com talco e com nanoargila
(Universidade Federal de São Carlos, 2010-05-17)
Talc is a well known lamellar mineral filler much used for mechanical reinforcement of polypropylene (PP) composites. Mineral nanoclay is also a lamellar filler that is gaining much interest due to its reinforcement effect ...
Estudo da solidificação do aço rápido M2 em diferentes lingotes e seus efeitos na microestrutura e propriedades mecânicas finais
(Universidade Federal de São Carlos, 2011-08-03)
The high speed steels are mostly applied in cutting tools, like drills, cores and top milling cutter. Its microstructure is composed by martensite, with high hardness, strong tempering resistance and disperses carbides on ...
Microestrutura e propriedades mecânicas de vitrocerâmicos do sistema Li2O – CaO – SiO2
(Universidade Federal de São Carlos, 2013-03-12)
An interesting characteristic of the Li2O-CaO-SiO2 glass-forming system is the possibility of obtaining certain crystalline phases and morphologies that may lead to tough glass-ceramics. However, very few published works ...
Influência da microestrutura na resistência mecânica de ligas hipereutéticas Al-Si solidificadas direcionalmente
(Universidade Federal de São Carlos, 2017-01-18)
The present research work deals with directional solidification (DS) of Al-15wt.% and 18wt.% Si alloys and further characterization of the related microstructures. Emphasis is given on the eutectic growth being affected ...
Avaliação do comportamento mecânico de nanocompósito de PEEK/nHA sob curta e longa duração para aplicação como biomaterial
(Universidade Federal de São Carlos, 2012-04-27)
The main objectives of this dissertation were to study the short (tensile and impact) and long-term (fatigue) mechanical behavior of nanocomposites of poly(ether-ether-ketone), PEEK, with nanohydroxyapatite, nHA, for ...
Influência da nanoargila no envelhecimento higrotérmico de compósitos de polipropileno / PP maleado / fibra de vidro
(Universidade Federal de São Carlos, 2010-05-21)
In short glass fiber (GF) reinforced polypropylene (PP) composites, despite of the chemically inert and non-polar nature of the matrix, the fiber-matrix interfacial integrity may be compromised in a hygrothermal active ...
Parâmetros térmicos de solidificação, microestrutura e resistência mecânica de ligas eutéticas Sn-0,7%Cu-(xNi)
(Universidade Federal de São Carlos, 2013-07-29)
Sn-Pb traditional solder alloys were overly utilize in electronic devices industry, since their properties and features use were adequate and well known. In the last years many restrictions and directives were and have ...
Influência de polipropileno maleado no comportamento de fratura (EWF) de compósitos de polipropileno/fibra de vidro
(Universidade Federal de São Carlos, 2012-04-11)
Thermoplastic composites reinforced with short glass fibers, to be used in technical engineering applications, usually requires a good balance of properties, such as strength and tenacity. For the case of the composite of ...
Crescimento super e subcrítico de trincas em vidros e vitrocerâmicos analisado via indentacão
(Universidade Federal de São Carlos, 2012-07-02)
In this dissertation we quantified properties that may better describe the mechanical behaviour of different glasses and glass-ceramics of the Na2O-CaO-SiO2-P2O5 system, based on the Biosilicate®chemical composition developed ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação direcional de ligas Al-Mg-Fe
(Universidade Federal de São Carlos, 2017-01-18)
Al-Mg-Fe alloys are appointed as favorable ones in respect of the costs involved and all the required properties for successful vessel service. However, experimental inter-relations of solidification thermal parameters, ...