Search
Now showing items 1-10 of 19
Estudo do processo de soldagem a ponto por fricção de juntas dissimilares entre ligas de alumínio e titânio
(Universidade Federal de São Carlos, 2016-12-09)
Multimaterial structures between aluminum and titanium alloys are a
technologically attractive field of research and their increasing use in the
transportation sector for weight and emission reduction is part of the ...
Comportamento mecânico em fadiga da liga de titânio beta metaestável Ti-5553
(Universidade Federal de São Carlos, 2016-10-14)
The microstructure of metastable beta Ti alloys is a decisive factor that
governs their properties and, therefore, the assessment of the relation between
the microstructure and the fatigue response means an advance in ...
Correlação entre morfologia, percolação elétrica e propriedades mecânicas de compósitos da blenda PLA/PBS com grafite expandido
(Universidade Federal de São Carlos, 2013-12-06)
In recent years, researchers from industry and universities have focused
their interests in polymer nanocomposites, especially in multifunctional
composites. The composites made from nano expanded graphite ( nGE ) ...
Deformação em canal angular de uma liga Al-4%Cu: efeito dos mecanismos de endurecimento na resistência mecânica e ductilidade
(Universidade Federal de São Carlos, 2011-03-03)
Internal boundaries hardening and precipitation hardening are two important mechanisms acting in metallic alloys. The former has special relevance when the grain size is reduced ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação direcional de ligas Al-Mg-Fe
(Universidade Federal de São Carlos, 2017-01-18)
Al-Mg-Fe alloys are appointed as favorable ones in respect of the costs involved and all the required properties for successful vessel service. However, experimental inter-relations of solidification thermal parameters, ...
Estudo da solidificação do aço rápido M2 em diferentes lingotes e seus efeitos na microestrutura e propriedades mecânicas finais
(Universidade Federal de São Carlos, 2011-08-03)
The high speed steels are mostly applied in cutting tools, like drills, cores and top milling cutter. Its microstructure is composed by martensite, with high hardness, strong tempering resistance and disperses carbides on ...
Avaliação do dano por choque térmico em concretos refratários via espectroscopia acústica ressonante não-linear
(Universidade Federal de São Carlos, 2012-03-02)
In this thesis the Non-linear Resonant Acoustic Spectroscopy Technique used to evaluate the mesoscopic non-linearity was incorporated into the Impulse Excitation Technique, which is extensively applied to the evaluation ...
Análise comparativa de fadiga mecânica em compósitos de polipropileno com talco e com nanoargila
(Universidade Federal de São Carlos, 2010-05-17)
Talc is a well known lamellar mineral filler much used for mechanical reinforcement of polypropylene (PP) composites. Mineral nanoclay is also a lamellar filler that is gaining much interest due to its reinforcement effect ...
O efeito dos tratamentos térmicos na microestrutura e nas propriedades mecânicas de rodas automotivas fundidas a baixa pressão na liga A356
(Universidade Federal de São Carlos, 2019-12-13)
The low-pressure die casting process to produce automotive aluminum alloy wheels is well known, and, in the last decades, has been consolidated as the most common way to produce light automotive wheels in large scale. The ...
Influence of Bobbin Tool Friction Stir Welding (BT-FSW) variants on the microstructure and properties of AA2060 and AA2196 aluminum alloys
(Universidade Federal de São Carlos, 2020-06-18)
In order to reduce total costs in aircrafts production, operation and maintenance, materials and processing techniques have been continuously further optimized. In this scenario, aluminum-lithium alloys have been studied ...