Buscar
Mostrando ítems 161-170 de 257
Influência das condições de processamento na morfologia e das propriedades mecânicas de sistemas poliméricos moldados por injeção e sua predição através de redes neurais artificiais.
(Universidade Federal de São Carlos, 2004-08-12)
The influence of the injection molding parameters on the morphology and mechanical properties of poly(phenylene sulfide), PPS, and of a 80/20(%wt) blend of PPS/block copolymer styrene-ethylene-butylene-styrene ,SEBS, ...
Processamento de pós ultrafinos e nanométricos por moagem de alta energia para a obtenção de compósitos cerâmicos Al2O3-(5%vol.)TIC.
(Universidade Federal de São Carlos, 2002-09-13)
The major objective of this thesis was to study the processing behaviour of Al2O3 ultra-fine and nanosized powders obtained by high energy milling
(HEM), to produce, after forming and sintering, Al2O3 .(5%vol.)SiC and Al2O3 ...
Concretos refratários avançados com alto teor de carbono
(Universidade Federal de São Carlos, 2010-03-12)
Refractory castables in the Al2O3-SiO2-SiC-C system are applied in the iron making process, including runners for molten slags and metals. Over the past years, several attempts to increase the carbon content of these ...
Conformação por spray da liga formadora de fase amorfa Fe66B30Nb4
(Universidade Federal de São Carlos, 2008-08-07)
The goal of this doctoral thesis was to contribute to the technology of amorphous metals production with dimensions of the order of millimeters or centimeters through the process of spray forming for the ternary Fe66B30Nb4 ...
Estudos microrreológicos da blenda PBT/SAN.
(Universidade Federal de São Carlos, 2006-09-22)
This work was motivated by the need of a better understanding of the
microrheological characteristics of polybutylene terephthalate, PBT, polymer
blends, such as the matrix phase PBT and the styrene-acrylonitrile, SAN
copolymer ...
Elaboração e implementação piloto de um portal para o apoio à cooperação científica e tecnológica e sua aplicação à área de tratamento de superfícies metálicas.
(Universidade Federal de São Carlos, 2005-12-02)
The globalization and the Communication and Information Technologies
(CIT´s) have been, respectively, increased the demand and facilitated the
existence of cooperation associated to innovation, research and development
(R&D). ...
Microestrutura e propriedades mecânicas de ligas Al-Si hipoeutéticas conformadas por spray.
(Universidade Federal de São Carlos, 2005-06-29)
The aims of this work were the microstructural and tensile properties
characterization of the hypoeutectic spray formed Al-Si 319 and 380 alloys. The
alloys were melted by induction furnace, gas atomized with nitrogen ...
Modificação do Poli(hidroxibutirato) PHB com nucleantes e com o copolímero (etileno-co-acetato de vinila) - EVA
(Universidade Federal de São Carlos, 2008-03-19)
In this work, we sought to modify PHB, processing it in the melted state, and to
evaluate the effect of the modifications on its mechanical properties and
biodegradation characteristics. The following systems were therefore ...
Otimização da reciclagem de resíduos siderúrgicos por redução carbotérmica
(Universidade Federal de São Carlos, 2008-04-04)
The evolution of the world-wide production of steel in rates superior to 7% per year in the last five years, strongly driven by China, which got off 222,4 millions in 2003 for 489,0 million tons in 20071, leads to a strong ...
Preparação de argilas organofílicas para o desenvolvimento de nanocompósitos a partir de compostos de PVC plastificado
(Universidade Federal de São Carlos, 2009-12-15)
Nanocomposites of Plasticized PVC with organoclays have a large potential to improve the thermal resistance of PVC as well as its flame retardancy. However, a great problem in the production of PVC nanocomposites is the ...