Buscar
Mostrando ítems 11-20 de 31
Análise da influência das condições de processamento na morfologia e nas propriedades de blendas poliméricas PBT/ABS moldadas por injeção
(Universidade Federal de São Carlos, 2011-06-29)
A study on the correlation of blend morphology, properties, the injection molding process and manufacturing methods of polymeric blends constituted of PBT and ABS was proposed. Thus, uncompatibilized PBT/ABS blends have ...
Processamento e caracterização de mantas de nanofibras eletrofiadas e orientadas de Poli(fluoreto de vinilideno)
(Universidade Federal de São Carlos, 2009-11-10)
In this work was developed a collector to process aligned uniaxially nanofibers mats and with low dimensions suitable for applications such as sensor or transducer. Such nanofibers mats may have applications where control ...
Modificação por nitretação a plasma das superfícies dos aços AISI-4140, AISI-420C e DIN16MnCr5
(Universidade Federal de São Carlos, 2011-05-26)
Plasma nitriding is a surface modification technique used for improving hardness, wear resistance, and fatigue. In this work, samples of AISI-4140, DIN16MnCr, and AISI-420C steels were heat treated, forming martensitic ...
Deformação da fase dispersa e degradação de blendas poliméricas em extrusora dupla-rosca aberta e fechada
(Universidade Federal de São Carlos, 2011-09-05)
In order to obtain flexibility of the processing in a twin-screw extruder and operate it as an internal mixer, the second phase dispersion and deformation and degradation were analyzed during processing in an open and ...
Influência da incorporação de negro de fumo e carbonato de cálcio micro e nanoparticulado nas propriedades reológicas, colorimétricas e mecânicas de filmes de polietileno de baixa densidade
(Universidade Federal de São Carlos, 2021-06-30)
In this work, the influence of incorporation of Carbon Black (CB) and CaCO3, both with different particle sizes, on the rheological, colorimetric and mechanical properties of LDPE films were studied. Three different types ...
Desenvolvimento de um colorímetro in-line para o monitoramento da extrusão de polímeros
(Universidade Federal de São Carlos, 2014-01-30)
This work shows the development, construction, validation and application of an in-line colorimeter used for real time color quantification of the melted flow during polymer processing in the extruder. The device uses a ...
Reutilização de fibras de para-aramida como reforço mecânico em poliamida 6,6
(Universidade Federal de São Carlos, 2016-06-09)
Aramid fibers are very known by their excellent combination of tensile strength and elastic modulus with low density. On the other hand, aramids do not melt which difficult the recycling process. This property is an important ...
Tenacificação de poli(ftalamida) (PPA) através de nanocompósitos com carbonato de cálcio e de blendas com copolímero estireno/etileno-butileno/estireno (SEBS)
(Universidade Federal de São Carlos, 2010-05-20)
This project aims the toughening of a high performance thermoplastic polyphthalamide (PPA). PPA resins is a good choice for special applications where the conditions are more severe than the ones an engineering thermoplastic ...
Caracterização de poli(hexametileno biguanida) e suas blendas com poli(álcool vinílico)
(Universidade Federal de São Carlos, 2012-07-31)
In this study, the physical-chemical characterization of poly(hexamethylene biguanide) hydrochloride, PHMB, was performed. It is a low molecular weight synthetic polymer with a broad-spectrum biocidal activity, widely used ...
Desvulcanização termomecânica contínua de borracha natural da banda de rodagem de pneus automotivos por meio do processo de extrusão em rosca dupla
(Universidade Federal de São Carlos, 2015-09-10)
The Natural rubber is a renewable source material widely used in the manufacture of automotive tire tread. The vulcanization results in a high thermodynamic stability and wide working range materials. However, after the ...