Search
Now showing items 11-20 of 24
Processamento e caracterização de ligas amorfizáveis TiCuNiZr e TiFeCoZr
(Universidade Federal de São Carlos, 2010-03-31)
Searching the development of bulk metallic glasses the research takes two directions, the development of alloys with a high glass forming ability and development of new processes or improving existing processes. In this ...
Estudo e desenvolvimento de blendas ternárias biodegradáveis a partir de poli(ácido lático), poli(álcool vinílico) e quitosana
(Universidade Federal de São Carlos, 2010-04-08)
The present study examined the use of poly(vinyl alcohol) as a compatibilizing agent between chitosan and PLA and as a diluent for chitosan in an approach where a dispersion chitosan in PVA produced by solution blending ...
Desenvolvimento de nanocompósitos poliméricos biodegradáveis a partir de pectina, amido e nanofibras de celulose
(Universidade Federal de São Carlos, 2010-09-16)
The objective of this project was the preparation of biodegradable films from polymer blends of citrus pectin (PEC) and thermoplastic starch (TPS) and the modification of its mechanical properties by formation of nanocomposites ...
Modificação e caracterização da superfície do aço inoxidável Martensítico AISI 410
(Universidade Federal de São Carlos, 2010-04-29)
This work deals about the surface modification of the AISI 410 martensitic stainless steel. The modification of steel surfaces is important for the improvement of its mechanical and tribological properties. Among the ...
Obtenção de curvas mestre de compósitos poliméricos estruturais utilizando ensaios dinâmicos mecânicos sob fluência
(Universidade Federal de São Carlos, 2010-08-11)
The growing advanced composites appliance in aircraft s structural parts has demanded to spread the knowledge about mechanical behavior prediction in longer time periods. In this way, the main purpose of this study is to ...
Concretos refratários avançados com alto teor de carbono
(Universidade Federal de São Carlos, 2010-03-12)
Refractory castables in the Al2O3-SiO2-SiC-C system are applied in the iron making process, including runners for molten slags and metals. Over the past years, several attempts to increase the carbon content of these ...
Análise comparativa de fadiga mecânica em compósitos de polipropileno com talco e com nanoargila
(Universidade Federal de São Carlos, 2010-05-17)
Talc is a well known lamellar mineral filler much used for mechanical reinforcement of polypropylene (PP) composites. Mineral nanoclay is also a lamellar filler that is gaining much interest due to its reinforcement effect ...
Preparação de nanofibras de celulose a partir de fibras de curauá para desenvolvimento de nanocompósitos poliméricos com EVA
(Universidade Federal de São Carlos, 2010-03-10)
The objective of the current project was the obtainment of cellulose nanofibers from curaua fibers and their application on the development of polymeric nanocomposites with EVA. A study of cellulose extraction according ...
Caracterização do comportamento de desgaste de cerâmicas de alumina densa : efeitos de parâmetros do ensaio do tipo pino no disco
(Universidade Federal de São Carlos, 2010-12-08)
Searching for wear resistant materials, attention has been paid to Si3N4, SiC, Al2O3 and ZrO2 ceramics due to their better properties as compared to other materials. Although ceramic are brittleness, improvements on the ...
O uso de B4C como aditivo de sinterização de SiC-Si3N4 visando o aumento da resistência à oxidação
(Universidade Federal de São Carlos, 2010-02-04)
In order to fulfill modern market requirements based on increased search for SiC Si3N4 products with high performance and good cost/benefit ratio, there is a natural need for additives able to sinter as well as decrease ...