Search
Now showing items 11-20 of 26
Desvulcanização termomecânica contínua de borracha natural da banda de rodagem de pneus automotivos por meio do processo de extrusão em rosca dupla
(Universidade Federal de São Carlos, 2015-09-10)
The Natural rubber is a renewable source material widely used in the manufacture of automotive tire tread. The vulcanization results in a high thermodynamic stability and wide working range materials. However, after the ...
Estudo das propriedades mecânicas, térmicas e de transporte do compósito com carbonato de cálcio nano e microparticulado em polipropileno
(Universidade Federal de São Carlos, 2011-03-04)
In this work were determined and compared to mechanical, thermal and barrier of the polypropylene composites containing micropartilate and microparticulate calcium carbonate. To prepare the composites, the filler was ...
Análise da influência das condições de processamento na morfologia e nas propriedades de blendas poliméricas PBT/ABS moldadas por injeção
(Universidade Federal de São Carlos, 2011-06-29)
A study on the correlation of blend morphology, properties, the injection molding process and manufacturing methods of polymeric blends constituted of PBT and ABS was proposed. Thus, uncompatibilized PBT/ABS blends have ...
Modificação por nitretação a plasma das superfícies dos aços AISI-4140, AISI-420C e DIN16MnCr5
(Universidade Federal de São Carlos, 2011-05-26)
Plasma nitriding is a surface modification technique used for improving hardness, wear resistance, and fatigue. In this work, samples of AISI-4140, DIN16MnCr, and AISI-420C steels were heat treated, forming martensitic ...
Avaliação da resistência à corrosão e das propriedades mecânicas da junta soldada de aço inoxidável duplex
(Universidade Federal de São Carlos, 2015-12-16)
The corrosion resistance and mechanical properties of hardness and toughness of a welded joint multipass duplex stainless steel have been evaluated under the condition with post-weld heat treatment and as-welded. The ...
Agentes mineralizadores e seus efeitos nas características morfológicas e físico-químicas de aluminas calcinadas
(Universidade Federal de São Carlos, 2015-08-31)
Calcination is an important step in the alumina production process, affecting the final properties of the resulting powder and the attained product. Over the previous decades, attempts have been conducted to understand ...
Study of rutile-supported anatase nanostructured films as photocatalysts for the degradation of water contaminants
(Universidade Federal de São Carlos, 2015-03-30)
This dissertation studies the application of rutile substrate as an alternative support for anatase films, specifically, on the growth and properties of anatase films. The films were utilized as catalysts for the ...
Expansão por umidade de revestimentos cerâmicos : métodos de medida e variáveis envolvidas
(Universidade Federal de São Carlos, 2015-08-05)
The expansion by humidity (EPU) is characterized by the increase in the size of the ceramic body when in contact with water in liquid or vapor. The phenomenon can contribute to the development of severe pathologies in ...
Laminação sob atmosfera controlada dos sistemas MgH2 e MgH2 - LaNi5 para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2016-08-04)
Magnesium hydride is a promisor candidate for H2 storage, manly due its high hydrogen gravimetric capacity (7.6% wt), low density, abundance and low cost. However, its
H-absorption/desorption occurs only at temperatures ...
Reutilização de fibras de para-aramida como reforço mecânico em poliamida 6,6
(Universidade Federal de São Carlos, 2016-06-09)
Aramid fibers are very known by their excellent combination of tensile strength and elastic modulus with low density. On the other hand, aramids do not melt which difficult the recycling process. This property is an important ...