Buscar
Itens para a visualização no momento 11-20 of 270
Analysis of crack propagation in the wedge splitting test via digital image correlation and finite element analyses
(Universidade Federal de São Carlos, 2019-02-19)
Castable refractories are applied in dangerous environments in which it is unpractical to avoid crack initiation. Therefore, their microstructure is usually complex in order to hinder crack propagation by toughening ...
Morfologia de ionômero E/MMA-Na+ proposta por técnicas termo-ópticas
(Universidade Federal de São Carlos, 2017-10-19)
The DSC low temperature endothermic peak shown by sodium neutralized poly(ethylene-random-methacrylic acid) (E/MAA) ionomers has been shown here to be the result of two different and dependent morphological transformations, ...
Produção, caracterização estrutural e propriedades de armazenagem de hidrogênio de ligas Mg-Zr
(Universidade Federal de São Carlos, 2017-03-31)
Magnesium is considered a promising candidate in applications of storage hydrogen in the solid state, due, among other factors, to its low relative cost and high gravimetric capacity (7,6 wt%.). For magnesium, the use of ...
Desenvolvimento de um ensaio mecânico não convencional para a análise da relaxação de tensões do politetrafluoretileno
(Universidade Federal de São Carlos, 2016-04-08)
The mechanical behavior of materials usually depends on room temperature
and loading rate. The identification of the time-dependent mechanical behavior
is a great difficulty for the industry in the application of new ...
Estudo da cinética de sinterização assistida por micro-ondas de pós cerâmicos nano e submicrométricos, com diferentes propriedades dielétricas
(Universidade Federal de São Carlos, 2017-08-30)
Kinetic studies related to microwave assisted sintering of ceramic materials are scarce in the literature, as well as on a nanoscale and submicron scale. Therefore, the aim of this dissertation was to study microwave ...
Avaliação da resistência à fadiga e caracterização microestrutural de fios extrudados e forjados da liga AA7050 reciclada por conformação por spray
(Universidade Federal de São Carlos, 2016-12-19)
High strength 7XXX precipitation hardened aluminum alloys are widely
used in aircraft structural components. The machining process applied in the
fabrication of these components is a low efficiency ...
Implementação do sistema de cristalização superficial induzida por laser em vidro de composição eutética
(Universidade Federal de São Carlos, 2019-03-01)
The radiation from lasers has been successfully applied to materials
processing such as drilling, cutting and welding, sintering of ceramic oxides,
surface heat treatment, directional solidification of single crystal ...
Modelagem computacional e análise das propriedades termodinâmicas do líquido super-resfriado do sistema Fe-Nb-B
(Universidade Federal de São Carlos, 2019-04-22)
Amorphous alloys of the Fe-Cr-Nb-B system are promising materials to supply the demand for new pipe coatings of higher wear resistance in the petrochemical industry due to its good abrasion and corrosion resistance properties. ...
Microestrutura, resistência mecânica e corrosão sob tensão em ligas de alumínio Al-0,3%Fe e Al-4%Cu processadas por extrusão em canal angular
(Universidade Federal de São Carlos, 2019-04-29)
Grain refinement is an important hardening mechanism in metallic alloys, notably when the grain size reaches the submicrometer scale. For this purpose, several techniques of Severe Plastic Deformation (SPD) have been ...
Investigação microestrutural e estudo das propriedades mecânicas da liga de alumínio AA2139 T3 e T8 soldadas por Friction Stir Welding - FSW
(Universidade Federal de São Carlos, 2011-02-17)
Aluminum alloys have low density and high corrosion resistance, and because of that this alloys are being increasingly used in aircraft industry. However, a downside of this alloys is its weldability in fusion process, ...