Buscar
Itens para a visualização no momento 11-20 of 25
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Grau de cisão de cadeia na degradação termomecânica de polímeros sob multiplas extrusões
(Universidade Federal de São Carlos, 2004-09-14)
One of the ways to follow the polymer degradation has been to calculate the average number of chain scissions (ns) that occurred during its
thermomechanical history. The average can be extended for each molecular weight ...
Monitoramento in-line da formação de nanocompósitos PP/MMT via intercalação no estado fundido
(Universidade Federal de São Carlos, 2008-08-04)
The aim of this work is to monitor in-line, using an optical detector fitted at the extruder die exit, the formation of PP/MMT nanocomposites during polymer melt compounding. The intensity of the detector´s signal is ...
Preparação e caracterização de nanocompósitos de LDPE e LDPE/EVA com partículas de Ag/TIO2 para aplicações antimicrobiais
(Universidade Federal de São Carlos, 2009-10-02)
This study investigated the use of a charger inorganic (titanium dioxide) as a support for silver nanoparticles and evaluated the use of material obtained as filler in polymer for antimicrobial application.Silver ...
Influência do negro de fumo na absorção da radiação na região do infravermelho para o reaquecimento do copolímero de poli(tereftalato de etileno) - PET.
(Universidade Federal de São Carlos, 2005-08-06)
The objective of this work was to study the influence of the use of carbon
black as infrared absorber to improve the PET resin heat-up during the
stretching blow molding of bottles. It was investigated the correlation ...
Monitoramento em tempo real da morfologia na extrusão da blenda polimérica polipropileno/ nylon 6.
(Universidade Federal de São Carlos, 2006-09-01)
The aim of this work is to assess in real time the morphological
parameters of polypropylene and polyamide 6 blends during the extrusion
process. An optical detector based on the visible light transmitted and extinction
principle ...
Modificação do Poli(hidroxibutirato) PHB com nucleantes e com o copolímero (etileno-co-acetato de vinila) - EVA
(Universidade Federal de São Carlos, 2008-03-19)
In this work, we sought to modify PHB, processing it in the melted state, and to
evaluate the effect of the modifications on its mechanical properties and
biodegradation characteristics. The following systems were therefore ...
Preparação de argilas organofílicas para o desenvolvimento de nanocompósitos a partir de compostos de PVC plastificado
(Universidade Federal de São Carlos, 2009-12-15)
Nanocomposites of Plasticized PVC with organoclays have a large potential to improve the thermal resistance of PVC as well as its flame retardancy. However, a great problem in the production of PVC nanocomposites is the ...
Nível de degradação termomecânica e coleta de compostos orgânicos voláteis durante a extrusão de polímeros
(Universidade Federal de São Carlos, 2008-12-01)
In this work we studied the thermomechanical degradation and volatile organic compound (VOC) generated during extrusion of the HDPE, PP, and PS. The degradation processes occurred during extrusion were analyzed by a new ...