Search
Now showing items 11-20 of 35
Durabilidade de polietileno em vinhaça quente e fresca em usina de açúcar e álcool
(Universidade Federal de São Carlos, 2013-12-10)
Geomembranes are polymeric sheets widely used in vinasse ponds to prevent contamination of soil. Long-term durability is expected, since failure can result in environmental impact. Smooth black commercial geomembranes and ...
Estudo da influência de cargas minerais e amido na biodegradação do PLA
(Universidade Federal de São Carlos, 2010-05-31)
Fossile fuel-produced plastics, once consumed and incorrectly
discharged into the environment, will end up as short-term non-degradable
residues and will contribute to global pollution. For this reason, the use of
polymers ...
Desenvolvimento de nanoblendas poliméricas PMMA/SAN
(Universidade Federal de São Carlos, 2012-08-03)
The motivation for this work was the idea that nanoblends are fundamentally dependent on the high interaction between the phases in the mixture. The strategy adopted in this study was based on the use of two polymers that ...
Estudo das propriedades de transporte de água e íons em tintas de acabamento à base de poliuretana alifática e poliuretana acrílica, novas e após envelhecimento sob radiação UV.
(Universidade Federal de São Carlos, 2005-08-26)
The present work has as objective the comparative study between anticorrosive painting systems with two types of vehicle - aliphatic polyurethane and acrylic polyurethane - loaded with different concentrations of iron oxide ...
Desenvolvimento de um colorímetro in-line para o monitoramento da extrusão de polímeros
(Universidade Federal de São Carlos, 2014-01-30)
This work shows the development, construction, validation and application of an in-line colorimeter used for real time color quantification of the melted flow during polymer processing in the extruder. The device uses a ...
Desvulcanização termomecânica contínua de borracha natural da banda de rodagem de pneus automotivos por meio do processo de extrusão em rosca dupla
(Universidade Federal de São Carlos, 2015-09-10)
The Natural rubber is a renewable source material widely used in the manufacture of automotive tire tread. The vulcanization results in a high thermodynamic stability and wide working range materials. However, after the ...
Caracterização experimental e simulação computacional das deformações induzidas na fusão e cristalização do PTFE
(Universidade Federal de São Carlos, 2016-03-07)
Polytetrafluoroethylene (PTFE) has excellent properties such as chemical inertness
and useful mechanical properties at high and low temperatures. After melt,
the PTFE viscosity is so high that the extrusion and injection ...
Desenvolvimento e caracterização de blendas PHBV/Ecoflex® e suas modificações com amidos
(Universidade Federal de São Carlos, 2008-05-30)
Plastics materials produced from petrochemicals are widely used due to
their versatility, mechanical properties and low cost, but they cause environmental
impact as a consequence of the accumulation of great amount of ...
Obtenção de nanocompósitos de poliamida 6 / argila nacional com diferentes agentes compatibilizantes
(Universidade Federal de São Carlos, 2005-09-01)
The formation of nanocomposites well exfoliated is dependent of several factors, like organic treatment with appropriate ammonium quaternary salts to promote adequate interaction between polymer and clay. The objective of ...
Influência do negro de fumo na absorção da radiação na região do infravermelho para o reaquecimento do copolímero de poli(tereftalato de etileno) - PET.
(Universidade Federal de São Carlos, 2005-08-06)
The objective of this work was to study the influence of the use of carbon
black as infrared absorber to improve the PET resin heat-up during the
stretching blow molding of bottles. It was investigated the correlation ...