Buscar
Mostrando ítems 11-20 de 35
Influência da compatibilização interfacial seletiva nas propriedades mecânicas de compósitos híbridos ternários de PET/fibra de vidro/elastômeros olefínicos reativos
(Universidade Federal de São Carlos, 2009-09-25)
Poly(ethylene terephthalate) (PET) is a semi-crystalline thermoplastic widely used for packaging of aereted soft drinks, which makes the recycling of post-consumer PET material necessary to prevent the negative environmental ...
Estudo da oxidação superficial do copolímero propileno/etileno durante o tratamento corona e sua influência no comportamento de termosoldagem
(Universidade Federal de São Carlos, 2010-06-23)
Different ethylene-propylene copolymers (Ziegler-Natta and Metallocene) were exposed to corona discharge and analyzed by spectroscopic, morphological and fractionation techniques. Effects of different treatment configurations ...
Processamento e caracterização de mantas de nanofibras eletrofiadas e orientadas de Poli(fluoreto de vinilideno)
(Universidade Federal de São Carlos, 2009-11-10)
In this work was developed a collector to process aligned uniaxially nanofibers mats and with low dimensions suitable for applications such as sensor or transducer. Such nanofibers mats may have applications where control ...
Caracterização físico-química de PET ramificado e de suas blendas com PET reciclado
(Universidade Federal de São Carlos, 2004-05-10)
The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate ...
Estudo e desenvolvimento de blendas ternárias biodegradáveis a partir de poli(ácido lático), poli(álcool vinílico) e quitosana
(Universidade Federal de São Carlos, 2010-04-08)
The present study examined the use of poly(vinyl alcohol) as a compatibilizing agent between chitosan and PLA and as a diluent for chitosan in an approach where a dispersion chitosan in PVA produced by solution blending ...
Desenvolvimento de um detector de espalhamento de luz LASER de baixo ângulo LALLS operando em tempo real na extrusão
(Universidade Federal de São Carlos, 2005-12-08)
In the present work a prototype of a low angle laser light scattering was developed and installed in an extruder in order to operate in real time. The equipment was built by the research group of which the author is member, ...
Processamento, caracterização e determinação do perfil de polarização do Poli(fluoreto de vinilideno)
(Universidade Federal de São Carlos, 2009-03-25)
This work characterized the ferroelectric polarization of the β-PVDF differentiating the individual contributions of the orientation and the crystalline phases in the remanent polarization of the PVDF. Those contributions ...
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Grau de cisão de cadeia na degradação termomecânica de polímeros sob multiplas extrusões
(Universidade Federal de São Carlos, 2004-09-14)
One of the ways to follow the polymer degradation has been to calculate the average number of chain scissions (ns) that occurred during its
thermomechanical history. The average can be extended for each molecular weight ...