Search
Now showing items 191-200 of 256
Avaliação da resistência à corrosão e das propriedades mecânicas da junta soldada de aço inoxidável duplex
(Universidade Federal de São Carlos, 2015-12-16)
The corrosion resistance and mechanical properties of hardness and toughness of a welded joint multipass duplex stainless steel have been evaluated under the condition with post-weld heat treatment and as-welded. The ...
Processos difusionais, cristalização e escoamento viscoso em dissilicato de bário vítreo
(Universidade Federal de São Carlos, 2014-04-24)
In this work, we analysed if the viscous flow successfully describes the transport of crystal nucleation and crystal growth structural units that occur at the liquid/crystal interface. In order to do this, we calculated ...
Transporte eletrônico em filmes ultrafinos nanoestruturados : o sistema SNO2:SB
(Universidade Federal de São Carlos, 2015-12-14)
This thesis describes a study of the electronic charge transport properties in antimony-doped tin oxide (ATO) ultrathin films, prepared by two different methods: by colloidal deposition process (CDP) and by pulsed electron ...
Nanopartículas de Fe3O4 funcionalizadas e nanocompósitos de base epóxi
(Universidade Federal de São Carlos, 2015-12-17)
The use of metal oxide nanoparticles in nanocomposite has provided new
and interesting properties and is one of the most promising areas in composites.
Compatibility between these nanoparticles and polymer matrix is the ...
Influência das condições de eletrodeposição sobre a resistência a corrosão, susceptibilidade à fragilização por hidrogênio e à corrosão sob tensão do aço ABNT – 4340 revestido com liga Zn/Ni
(Universidade Federal de São Carlos, 2011-01-28)
Zinc-nickel alloys were electrodeposited on ABNT 4340 high strength steel in chloride acid media. The effect of the electrolyte composition and electroplating conditions on cathodic efficiency, chemical composition, ...
Spray forming of wear and corrosion resistant bimetallic pipes : from the alloy design to the semi- industrial process
(Universidade Federal de São Carlos, 2016-02-29)
The oil exploitation and production at the pre-salt fields in a safety and efficient
way depends on the development of materials that withstand the severe work
conditions found in these fields. For instance, pipes, such ...
Caracterização estrutural e monitoramento ótico da cristalização de nanocompósitos de polietileno de alta densidade com partículas de diferentes geometrias durante a moldagem por injeção
(Universidade Federal de São Carlos, 2014-03-06)
The main objectives of this project were to study the morphology, the crystallization
kinetics and to monitor on-line the crystallization during the injection
molding process using an optical system of nanocomposites of ...
Estudo da dispersão, localização seletiva e efeito compatibilizante de argila montmorilonita em blendas poliméricas de policarbonato/SAN
(Universidade Federal de São Carlos, 2015-03-30)
The present study investigated the compatibilization effect and stabilization on the morphology of polycarbonate/styrene-acrylonitrile blends (PC / SAN) by incorporating montmorillonite clay. A systematic study was realized ...
Transformações de fase termoelásticas em ligas com memória de forma a base de Cu-Al-Ni
(Universidade Federal de São Carlos, 2016-02-26)
Shape memory alloys (SMA) have some exceptional properties such as the
shape memory effect and the superelasticity. Both are associated with a
martensitic/austenitic phase transformation. Alloys of the system Cu-Al-Ni, ...
Desenvolvimento de compósito de poliuretano reforçado com nanofibrilas de celulose isoladas de candeia (Eremanthus erythropappus)
(Universidade Federal de São Carlos, 2016-02-26)
Candeia (Eremanthus erythropappus) is an important raw material due to the essential oil that can be extracted from the whole tree. The essential oil contains (-)--bisabolol that has an active principle with pharmacological ...