Buscar
Mostrando ítems 31-40 de 277
Abordagem termodinâmica do transporte iônico e da relaxação estrutural em vidros fosfatos de prata
(Universidade Federal de São Carlos, 2016-09-12)
Ionic conductivity in glasses was first discovered and demonstrated by
Warburg in 1884, but although it has been studied for over a century, the
mechanisms underlying ionic conduction in glasses are not yet entirely ...
Indicadores de patentes para o monitoramento tecnológico em aços para dutos utilizados em transporte de hidrocarbonetos
(Universidade Federal de São Carlos, 2016-08-05)
Most part of the hydrocarbons reserves used in the global energy matrix are far
from their main consumer markets. One of the most technically and
economically viable means for such transport is carrying it out ...
Deformação piroplástica em porcelanatos
(Universidade Federal de São Carlos, 2016-09-09)
In recent years porcelain stoneware tiles showed the highest growth in
production and consumption in ceramic industry sector. To achieve low
porosity, which ensures the high performance of the product, is required ...
Comportamento mecânico em fadiga da liga de titânio beta metaestável Ti-5553
(Universidade Federal de São Carlos, 2016-10-14)
The microstructure of metastable beta Ti alloys is a decisive factor that
governs their properties and, therefore, the assessment of the relation between
the microstructure and the fatigue response means an advance in ...
Desenvolvimento de nanocompósitos híbridos de epóxi/NTCPM/cargas minerais e avaliação das propriedades mecânicas, elétricas e térmicas
(Universidade Federal de São Carlos, 2016-07-11)
In the present work epoxy/ MWCNT/ mineral fillers nanocomposites were
obtained using ultrasonication and calendering. The effect of addition of mineral
filler (calcium carbonate, montmorillonite and sepiolite) in electrical, ...
Sinterização por micro-ondas em uma e em duas etapas de varistores à base de ZnO
(Universidade Federal de São Carlos, 2013-09-30)
This thesis is aimed at one-step microwave sintering at frequencies of 2.45 GHz and 30 GHz and the development of two-step microwave sintering (MW-TSS) at 2.45 GHz of ZnO-based nanostructured semiconductor compositions for ...
Otimização dos parâmetros de soldagem a ponto por Fricção (FSpW) da liga AlMgSc e avaliação das propriedades mecânicas estáticas e dinâmicas
(Universidade Federal de São Carlos, 2017-08-28)
Aluminum alloys are widely used in transportation industry to reduce structural weight and fuel consumption. The development of advanced alloys and more effective technologies for joining materials contribute to achieve ...
Desenvolvimento de protótipo de sensor de umidade cerâmico
(Universidade Federal de São Carlos, 2012-08-24)
Humidity sensor is a special type of gas sensor which is sensitive only to H2O molecules. It has a large variety of applications in industrial, household and agricultural equipments. Humidity ceramic sensors have been ...
Refratários avançados sinterizados com líquidos transientes
(Universidade Federal de São Carlos, 2017-03-09)
Sintering additives (AS) have great potential to be applied in refractory castables as they reduce the densification temperature of these products. Additionally, these components may induce the generation of a transient ...
Deformação plástica severa da liga Ti-13Nb-13Zr
(Universidade Federal de São Carlos, 2017-03-03)
Biomedical devices currently in use (prostheses, implants) have satisfactory performance in many cases. However, sometimes the body reacts to the device insertion and may lead to its rapid replacement. Some of these ...