Buscar
Mostrando ítems 81-90 de 259
Concretos refratários nanoligados para aplicação em unidades de craqueamento catalítico
(Universidade Federal de São Carlos, 2013-09-24)
In the petrochemical industry gasoline and LPG are produced in the fluid catalytic cracking unit (FCCU). The cracking occurs by the contact of crude oil with fluidized fine particles of a ceramic catalyst. The process ...
Seleção de ligas com alta tendência de formação de estrutura amorfa
(Universidade Federal de São Carlos, 2007-03-08)
The understanding of the law that explain why certain alloys form amorphous
structure by cooling the molten melt under cooling rates lower than others alloys
remains as one of the great challenges of the materials science ...
Processamento de pós ultrafinos e nanométricos por moagem de alta energia para a obtenção de compósitos cerâmicos Al2O3-(5%vol.)TIC.
(Universidade Federal de São Carlos, 2002-09-13)
The major objective of this thesis was to study the processing behaviour of Al2O3 ultra-fine and nanosized powders obtained by high energy milling
(HEM), to produce, after forming and sintering, Al2O3 .(5%vol.)SiC and Al2O3 ...
Concretos refratários avançados com alto teor de carbono
(Universidade Federal de São Carlos, 2010-03-12)
Refractory castables in the Al2O3-SiO2-SiC-C system are applied in the iron making process, including runners for molten slags and metals. Over the past years, several attempts to increase the carbon content of these ...
Conformação por spray da liga formadora de fase amorfa Fe66B30Nb4
(Universidade Federal de São Carlos, 2008-08-07)
The goal of this doctoral thesis was to contribute to the technology of amorphous metals production with dimensions of the order of millimeters or centimeters through the process of spray forming for the ternary Fe66B30Nb4 ...
Estudos microrreológicos da blenda PBT/SAN.
(Universidade Federal de São Carlos, 2006-09-22)
This work was motivated by the need of a better understanding of the
microrheological characteristics of polybutylene terephthalate, PBT, polymer
blends, such as the matrix phase PBT and the styrene-acrylonitrile, SAN
copolymer ...
Elaboração e implementação piloto de um portal para o apoio à cooperação científica e tecnológica e sua aplicação à área de tratamento de superfícies metálicas.
(Universidade Federal de São Carlos, 2005-12-02)
The globalization and the Communication and Information Technologies
(CIT´s) have been, respectively, increased the demand and facilitated the
existence of cooperation associated to innovation, research and development
(R&D). ...
Monitoramento em tempo real da morfologia na extrusão da blenda polimérica polipropileno/ nylon 6.
(Universidade Federal de São Carlos, 2006-09-01)
The aim of this work is to assess in real time the morphological
parameters of polypropylene and polyamide 6 blends during the extrusion
process. An optical detector based on the visible light transmitted and extinction
principle ...
Caracterização estrutural e elétrica de óxidos semicondutores do tipo espinélio.
(Universidade Federal de São Carlos, 2002-10-14)
Modificação do Poli(hidroxibutirato) PHB com nucleantes e com o copolímero (etileno-co-acetato de vinila) - EVA
(Universidade Federal de São Carlos, 2008-03-19)
In this work, we sought to modify PHB, processing it in the melted state, and to
evaluate the effect of the modifications on its mechanical properties and
biodegradation characteristics. The following systems were therefore ...