Buscar
Itens para a visualização no momento 1-10 of 27
Desenvolvimento de nanoblendas poliméricas PMMA/SAN
(Universidade Federal de São Carlos, 2012-08-03)
The motivation for this work was the idea that nanoblends are fundamentally dependent on the high interaction between the phases in the mixture. The strategy adopted in this study was based on the use of two polymers that ...
Caracterização experimental e simulação computacional das deformações induzidas na fusão e cristalização do PTFE
(Universidade Federal de São Carlos, 2016-03-07)
Polytetrafluoroethylene (PTFE) has excellent properties such as chemical inertness
and useful mechanical properties at high and low temperatures. After melt,
the PTFE viscosity is so high that the extrusion and injection ...
Desvulcanização termomecânica contínua de borracha natural da banda de rodagem de pneus automotivos por meio do processo de extrusão em rosca dupla
(Universidade Federal de São Carlos, 2015-09-10)
The Natural rubber is a renewable source material widely used in the manufacture of automotive tire tread. The vulcanization results in a high thermodynamic stability and wide working range materials. However, after the ...
Desenvolvimento de um colorímetro in-line para o monitoramento da extrusão de polímeros
(Universidade Federal de São Carlos, 2014-01-30)
This work shows the development, construction, validation and application of an in-line colorimeter used for real time color quantification of the melted flow during polymer processing in the extruder. The device uses a ...
Blendas de PHBV e PCL para uso em dispositivos de osteossíntese
(Universidade Federal de São Carlos, 2010-12-15)
This study aimed to develop and characterize polymer blends using biodegradable and bioabsorbable polymers poly (hydroxybutyrate-co-valerate) PHBV with 12% valerate, and poly (ε-caprolactone) PCL, in order to make ...
Utilização de concentrados de eva-argila organofílica obtidos por spray drying, drais e extrusão no desenvolvimento de nanocompósitos poliméricos
(Universidade Federal de São Carlos, 2014-12-15)
The objective of this work was the development of polymer
nanocomposites with montmorillonite organoclays (OMMT) using EVA-OMMT
concentrated obtained by spray drying, Drais and extrusion, making the
characterization and ...
Tenacificação de poli(ftalamida) (PPA) através de nanocompósitos com carbonato de cálcio e de blendas com copolímero estireno/etileno-butileno/estireno (SEBS)
(Universidade Federal de São Carlos, 2010-05-20)
This project aims the toughening of a high performance thermoplastic polyphthalamide (PPA). PPA resins is a good choice for special applications where the conditions are more severe than the ones an engineering thermoplastic ...
Caracterização de poli(hexametileno biguanida) e suas blendas com poli(álcool vinílico)
(Universidade Federal de São Carlos, 2012-07-31)
In this study, the physical-chemical characterization of poly(hexamethylene biguanide) hydrochloride, PHMB, was performed. It is a low molecular weight synthetic polymer with a broad-spectrum biocidal activity, widely used ...
Correlação entre morfologia, percolação elétrica e propriedades mecânicas de compósitos da blenda PLA/PBS com grafite expandido
(Universidade Federal de São Carlos, 2013-12-06)
In recent years, researchers from industry and universities have focused
their interests in polymer nanocomposites, especially in multifunctional
composites. The composites made from nano expanded graphite ( nGE ) ...
Desenvolvimento de compósitos biodegradáveis a partir de amido termoplástico e fibras vegetais
(Universidade Federal de São Carlos, 2011-09-16)
This project had as main objectives to obtain and to develop new and biodegradable composites from renewable sources using a thermoplastic starch (TPS) matrix reinforced with different amounts of natural fibers, acuri, ...