Search
Now showing items 1-10 of 31
Eletrólito sólido β/β”-alumina para protótipo de bateria sódio-níquel
(Universidade Federal de São Carlos, 2014-10-07)
Itaipu Binational along with the Swiss company power generation Kraftwerke Oberhasli AG/KWO, are developing a battery of nickel-sodium salt (Na/NiCl2), which uses β/β"-Al2O3 ceramic as solid electrolyte, to apply on electric ...
Síntese e sinterização em micro-ondas, e caracterização da Perovskita BA 0,5Sr0,5Co0,8Fe0,2O 3-δ
(Universidade Federal de São Carlos, 2014-02-27)
Ba0,5Sr0,5Co0,8Fe0,2O3-δ (BSCF) perovskite-type oxide is currently one of the most promising materials for applications in oxygen separation membranes. BSCF powder synthesis has received considerable attention because ...
Utilização de concentrados de eva-argila organofílica obtidos por spray drying, drais e extrusão no desenvolvimento de nanocompósitos poliméricos
(Universidade Federal de São Carlos, 2014-12-15)
The objective of this work was the development of polymer
nanocomposites with montmorillonite organoclays (OMMT) using EVA-OMMT
concentrated obtained by spray drying, Drais and extrusion, making the
characterization and ...
Preparação de nanocompósitos baseados na intercalação de argilominerais em matrizes ureia-formaldeído para aplicação como fertilizantes de liberação controlada
(Universidade Federal de São Carlos, 2014-02-27)
The increase on the price of fertilizers, and the high Brazilian importing
dependency of this material, raise the cost of cultures. Such cost may be
reduced by more efficient and efficiently used fertilizers. From an ...
Investigação do desenvolvimento microestrutural de eletrólito sólido β/β’’-alumina visando sua utilização em bateria ZEBRA
(Universidade Federal de São Carlos, 2014-10-09)
The ZEBRA battery (Zero Emission Battery Research Activity) is an efficient electrochemical energy storage device with high energy density and high power. This has been considered one of the key technologies for insertion ...
Estudo da cinética de oxidação em altas temperaturas da liga SV15 aplicada na fabricação de sedes de válvulas de escape de motores automotivos
(Universidade Federal de São Carlos, 2014-04-14)
The SV15 alloy is applied in the production of the exhaust valve seats of automotive engines. The conditions of service in which the part is submitted require materials resistant to oxidation because of high temperature ...
Otimização do processo de soldagem por fricção por ponto (FSpW) de soldas de materiais similares e dissimilares de ligas leves
(Universidade Federal de São Carlos, 2014-08-07)
Currently there is a lot of pressure in the aeronautical and automobilistic transport section in order to reduce the fuel consumption and consequently cost and gas emissions. This measure has increased in the last years ...
Processamento e estudo das propriedades de filmes e peças injetadas de nanobiocompósitos de nanocristais de celulose e matrizes biodegradáveis
(Universidade Federal de São Carlos, 2014-04-04)
This study aimed at evaluating the potential of application of cellulose nanocrystals as reinforcing elements of biodegradable polymeric matrices, in the films and injection molded pieces applications. Two polymeric matrices ...
Estudo de fibras de folhas de abacaxis (gênero Ananas) e sua utilização em compósitos biodegradáveis com matriz de poli(ácido lático) (PLA)
(Universidade Federal de São Carlos, 2014-08-19)
In this work natural fibers from new pineapple varieties were studied aiming at their application as mechanical reinforcement for green polymer composites. Eighteen varieties of pineapple leave fibers (PALFs) were then ...
Influência da adição de Nb, Ti e Zr nas propriedades de fluência da liga HP fundida por centrifugação
(Universidade Federal de São Carlos, 2014-08-05)
This work aimed to evaluate the influence caused by Nb single addition and by Nb-Ti and Nb-Zr combined addition in the high temperature mechanical properties of a centrifugally cast HP alloy. Particular investigation was ...