Buscar
Itens para a visualização no momento 1-10 of 26
Desenvolvimento de nanocompósitos de amido/palygorskita modificada com íons de prata via casting contínuo
(Universidade Federal de São Carlos, 2019-02-27)
The food industry has invested cheap and efficient technologies capable of providing fresh and additive-free food products. One of the possible solutions is the use of antimicrobial active packaging that ensures the ...
Síntese in situ pelo método Pechini assistido por micro-ondas dos compósitos livres de chumbo (1-x)BaZr0,08Ti0,92O3/(x)CoFe2O4
(Universidade Federal de São Carlos, 2019-04-30)
Currently, there is considerable interest in developing lead-free composites in the scientific area. This is occurs due to the growing demand for new multifunctional materials with potential technological applications. ...
Estudo da incorporação de nanopartículas de óxido de zinco e pentóxido de nióbio em polietileno linear de baixa densidade
(Universidade Federal de São Carlos, 2019-03-29)
Linear low-density polyethylene (LLDPE) is one of the most widely used materials in greenhouse covering, due to its low cost and transparency to photosynthetically active radiation up to 80%. However, this polymer also ...
Analysis of crack propagation in the wedge splitting test via digital image correlation and finite element analyses
(Universidade Federal de São Carlos, 2019-02-19)
Castable refractories are applied in dangerous environments in which it is unpractical to avoid crack initiation. Therefore, their microstructure is usually complex in order to hinder crack propagation by toughening ...
Implementação do sistema de cristalização superficial induzida por laser em vidro de composição eutética
(Universidade Federal de São Carlos, 2019-03-01)
The radiation from lasers has been successfully applied to materials
processing such as drilling, cutting and welding, sintering of ceramic oxides,
surface heat treatment, directional solidification of single crystal ...
Modelagem computacional e análise das propriedades termodinâmicas do líquido super-resfriado do sistema Fe-Nb-B
(Universidade Federal de São Carlos, 2019-04-22)
Amorphous alloys of the Fe-Cr-Nb-B system are promising materials to supply the demand for new pipe coatings of higher wear resistance in the petrochemical industry due to its good abrasion and corrosion resistance properties. ...
Microestrutura, resistência mecânica e corrosão sob tensão em ligas de alumínio Al-0,3%Fe e Al-4%Cu processadas por extrusão em canal angular
(Universidade Federal de São Carlos, 2019-04-29)
Grain refinement is an important hardening mechanism in metallic alloys, notably when the grain size reaches the submicrometer scale. For this purpose, several techniques of Severe Plastic Deformation (SPD) have been ...
Caracterização microestrutural e propriedades de desgaste de revestimento de aço inoxidável supermartensítico modificado com boro processado por HVOF
(Universidade Federal de São Carlos, 2019-05-28)
Stainless steels are recognized as good materials to be used in corrosive environments, but their wear resistance does not exhibit good results. Therefore, researches have been developed to increase the wear resistance of ...
Indicadores de produção científica para prospecção tecnológica em manufatura aditiva de biocerâmicas
(Universidade Federal de São Carlos, 2019-05-31)
In the Bone Tissue Engineering, biomaterials are used as scaffolds to produce a support and cell growing. Because of the similarity to the bones cells, ceramic compounds are the main materials used to produce the scaffold. ...
Otimização das propriedades mecânicas da liga de alumínio 319 contaminada com ferro
(Universidade Federal de São Carlos, 2019-02-15)
The influence of iron additions (0.6, 0.8, 1.2 and 1.5 wt.%) and heat treatment on the microstructure and tensile properties of the 319-aluminum alloy processed by spray forming and rotary swaging was investigated. The ...