Buscar
Itens para a visualização no momento 1-10 of 17
Effect of structural singularities on superwettability of SiO₂-based coatings
(Universidade Federal de São Carlos, 2019-11-07)
A detailed study on the correlation between structural singularities and wettability of neat and chemically modified coatings prepared from layer-by-layer (LbL) assembled silica nanoparticles (SiO₂) was performed. ...
Estudo da indução da grafitização da resina fenólica fenol/formaldeído
(Universidade Federal de São Carlos, 2019-08-14)
Among the probable carbon sources, there are the polymers, as the phenolic resin, which produces residual carbon around 60% wt./wt. after thermal treatment. It is classified as non-graphitizable, because it has not graphitic ...
Desenvolvimento de cerâmicas refratárias engenheiradas densas e porosas
(Universidade Federal de São Carlos, 2019-09-04)
High temperature processes are of great importance as they are widely applied in the manufacture of commodities, consumer goods and advanced materials. For these processes to be possible, the thermal environment in which ...
Estudo de ligas Ti-Nb-Zr e Ti-Nb-Mg, fundidas e na forma de recobrimentos sobre aço inoxidável, para aplicações biomédicas
(Universidade Federal de São Carlos, 2019-10-31)
In the present thesis, nanostructured coatings of Ti (100 - (20 + z)) -Nb20-Xz alloys (X = Zr and Mg) were produced by sputtering. So with that, it was possible to analyze the effect of the addition of Zr and Mg on the ...
Contribuição para a melhoria no desempenho ambiental de porcelanatos: Avaliação de Ciclo de Vida (ACV) e o uso de fundentes enérgicos
(Universidade Federal de São Carlos, 2019-08-01)
Whether due to growing environmental awareness or legal and market requirements, the quest for sustainable development has leading to the need to improve processes and products. In this scenario, the general objective of ...
Sinterização diferencial e auto-tensionamento: efeitos na condutividade elétrica da Zircônia estabilizada com Ítria
(Universidade Federal de São Carlos, 2019-06-19)
Recent researches indicate the possibility of increasing Yttria Stabilized
Zirconia (YSZ) electrical conductivity by generating stress states in the material,
by applying external loads or by its insertion in multilayer ...
Identificação dos parâmetros do modelo de Drucker-Prager/CAP para estudo da densificação mecânica de alumina atomizada
(Universidade Federal de São Carlos, 2019-06-27)
Pressing followed by sintering is among the most versatile materials processing
routes and suits different classes of materials: ceramic, polymeric and metallic.
In the last decade, this processing route has been gaining ...
Selective laser melting of a biocompatible Ti-35Nb-7Zr-5Ta alloy
(Universidade Federal de São Carlos, 2019-08-12)
Neste trabalho, estudou-se uma nova rota de fabricação de peças de uma liga biocompatível. Assim, uma liga Ti-35Nb-7Zr-5Ta (% em peso) biocompatível foi processada por fusão seletiva a laser (FSL). Os principais parâmetros ...
Influence of surface treatments on corrosion resistance properties of ultrafine grained titanium alloys for biomedical applications
(Universidade Federal de São Carlos, 2019-08-09)
Titanium and its alloys are used as biomaterials because their excellent combination of high corrosion resistance, low modulus of elasticity and biocompatibility. However, titanium and its alloys cannot meet all the clinical ...
Perovskitas óxidas para aplicação eletroquímica e fotovoltaica
(Universidade Federal de São Carlos, 2019-07-26)
This work aimed to investigate the production of lanthanum perovskites LaCoO3 and LaFeO3 in the form of thin films and to evaluate their use as catalysts for water splitting as well as absorbers for photovoltaic devices. ...