Search
Now showing items 1-7 of 7
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Influence of Bobbin Tool Friction Stir Welding (BT-FSW) variants on the microstructure and properties of AA2060 and AA2196 aluminum alloys
(Universidade Federal de São Carlos, 2020-06-18)
In order to reduce total costs in aircrafts production, operation and maintenance, materials and processing techniques have been continuously further optimized. In this scenario, aluminum-lithium alloys have been studied ...
Evolução microestrutural e propriedades mecânicas das ligas Al-10%Si-0,45%Mg e Al-10%Si-1,0%Mg
(Universidade Federal de São Carlos, 2021-07-28)
Al-Si alloys with high silicon (Si) content are widely used in aerospace, automotive, microelectronics, among others. In this context, the Al-10 wt.% Si alloys with the addition of Magnesium (Mg) are alternatives that ...
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, 2021-02-19)
In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ...
Design de aços inoxidáveis austeníticos de alto teor de nitrogênio via triagem de alto desempenho por método CALPHAD
(Universidade Federal de São Carlos, 2023-07-21)
Nickel is essential for austenitic stainless steels of the 3xx class (8-10 wt%) due to its austenitizing character. However, its notorious price volatility directly affects the stainless steel industry. In light of this, ...
Soldagem por ponto por fricção das ligas de alumínio 5A06-O/2219-T87: caracterização mecânica e microestrutural
(Universidade Federal de São Carlos, 2022-11-30)
Refill Friction Stir Spot Welding (RFSSW) is a solid-state joining technique for welding dissimilar and similar materials applied to light alloys and thermoplastics. Thus, the purpose of this work was to evaluate the ...
Efeito do teor de titânio no endurecimento por precipitação em uma liga à base de Co-Ni e consequências nas propriedades mecânicas
(Universidade Federal de São Carlos, 2021-04-19)
The alloy subject of this study, designated by the Unified Numbering System,
R30035 and internationally known as MP35N®, is a 35 Ni – 33.5 Co – 20.5 Cr – 9.5
Mo alloy with very-high mechanical strength, ductility, and ...