Listar Ciência e Engenharia de Materiais - PPGCEM por temas CNPq "ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA::METALURGIA FISICA"
Mostrando ítems 41-60 de 63
-
Estudo da viabilidade de formação de nitreto de boro em aços inoxidáveis ferríticos
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 02/03/2020)Since the 90s, the petroleum industry has been conducting research on alloys that are wear and corrosion resistant once several equipment parts used in the oil exploitation, extraction and production, such as pipes, joints, ... -
Manufatura aditiva da liga reciclada Al-Fe-Cr-Ti formadora de fase quasicristalina
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 27/02/2020)The precipitation of quasicrystalline phase in an α-Al dendritic matrix provides Al-based alloys with high mechanical and wear resistance, mainly at high temperatures, which are promising for applications as automotive and ... -
Estudo de ligas Ti-Nb-Zr e Ti-Nb-Mg, fundidas e na forma de recobrimentos sobre aço inoxidável, para aplicações biomédicas
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 31/10/2019)In the present thesis, nanostructured coatings of Ti (100 - (20 + z)) -Nb20-Xz alloys (X = Zr and Mg) were produced by sputtering. So with that, it was possible to analyze the effect of the addition of Zr and Mg on the ... -
Efeito da re-nitretação nas propriedades de matrizes de extrusão a quente de alumínio, confeccionadas em aços ferramenta vex e h13
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 08/07/2018)Aluminum extrusion is a thermomechanical process widely used throughout the world, and the performance of this process is strongly dependent on the quality of the tool steel used in the manufacture of the dies. In this ... -
Amorfização e cristalização da liga fe68cr8mo4nb4b16: caracterização através de técnicas avançadas de microscopia eletrônica
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 05/08/2019)Stainless steels of the different classes can have their composition modified through the addition of boron, aiming to obtain both amorphous phases and the controlled formation of borides. The formation of amorphous phase ... -
Otimização das propriedades mecânicas da liga de alumínio 319 contaminada com ferro
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 15/02/2019)The influence of iron additions (0.6, 0.8, 1.2 and 1.5 wt.%) and heat treatment on the microstructure and tensile properties of the 319-aluminum alloy processed by spray forming and rotary swaging was investigated. The ... -
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 30/07/2019)The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ... -
Design of high entropy alloys for hydrogen storage: study of the Mg-V-Al-Cr-Ni, Mg-Al-Ti-Mn-Nb and Ti-V-Nb-Cr systems
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 21/05/2021)The advent of high entropy alloys (HEA) has brought new opportunities and challenges to metallurgy. Due to extensive compositional field of HEAs, the possibility of controlling properties in a composition-driven approach ... -
Study of bioactivity, corrosion resistance and fatigue behavior of Ti-12Mo-6Zr-2Fe alloy after different surface treatments
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 19/11/2020)Demand for new implants with improved bioactivity, corrosion resistance, and optimal mechanical properties has been increasing considerably. In this sense, different surface treatments are applied in titanium alloys to ... -
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 19/02/2021)In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ... -
Refill friction stir spot welding of different thickness Al-Cu alloy using a tool with reduced dimensions for aerospace application
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 12/11/2020)Refill Friction Stir Spot Welding has grown as an interesting alternative to conventional joining techniques in recent years, especially when it comes to high strength aluminum alloys. Although current results show promise, ... -
Multilayered refill friction stir spot welding of AA2024 and aluminum foils for electric vehicle battery application
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 06/11/2020)Different processes are currently being used to weld aluminum and copper in a multilayered configuration in battery pouches for the automotive industry. The methods most used are mechanical joint, ultrasonic welding, laser ... -
Comportamento de fluência e tração a quente do aço inoxidável austenítico AISI 201LN
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 21/09/2020)Among the different stainless steel (SS) series, the 200 series, also known as Cr-Ni-Mn alloys, has recently been gaining prominence worldwide. In spite of that, studies addressing the high-temperature deformation these ... -
Efeito da adição de Al e C na evolução microestrutural e no comportamento mecânico de aços austeníticos de baixa densidade com alto teor de Mn
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 20/05/2021)Low-density steels are advanced materials that are being developed mainly for the automotive industry to reduce the structural weight of cars. The most common studied compositions comprise FeMnAlC variations, in which both ... -
Efeito da microadição de oxigênio na estabilidade microestrutural da liga Ti-29Nb-13Ta-4,6Zr processada via deformação plástica severa e envelhecimento
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 24/02/2021)Gum Metal corresponds to a family of β-Ti alloys that are currently receiving great attention due to its outstanding properties such as low elastic modulus, superelasticity, and high tensile strength. These alloys show ... -
Efeitos de baixos teores de aditivos (TiFe, Fe, TiAl, Nb₂O₅) na cinética de absorção e dessorção de hidrogênio pelo sistema Mg/MgH₂
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 31/08/2021)The hydrogen economy holds great promise in supplying our planet's urgent clean energy needs. The effective and safe hydrogen storage remains a major technological challenge. Thus, the H2 storage in metal hydrides of light ... -
Desenvolvimento de ligas amorfas e nanocristalinas do sistema Fe-Cr-Ni-B e suas propriedades de corrosão
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 14/02/2019)Fe-Cr-Ni-B system alloys with partially amorphous structures can ensure a very attractive combination of mechanical and electrochemical properties, far superior to conventional materials. It can be used, for example, in ... -
Estudo sobre a formação da interface em soldas dissimilares de alumínio e aço galvanizado durante o processo de soldagem por fricção por ponto (RFSSW) com controle por carga
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 29/03/2022)In the current scientific and technological scenario, the increased demand for dissimilar joints aiming a combination of optimized mechanical properties has driven innovations. Based on this, the present project proposes ... -
Evolução microestrutural e propriedades mecânicas das ligas Al-10%Si-0,45%Mg e Al-10%Si-1,0%Mg
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus São Carlos, 28/07/2021)Al-Si alloys with high silicon (Si) content are widely used in aerospace, automotive, microelectronics, among others. In this context, the Al-10 wt.% Si alloys with the addition of Magnesium (Mg) are alternatives that ... -
Weldability of AA5083-O/H111 and naval GL D36 steel lap joints by friction stir welding
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 25/01/2021)Steel structures welded with aluminum alloys, which combine the low cost and high mechanical strength of steel with the weight reduction and the excellent specific properties of the aluminum alloys, are in great demand. ...