Search
Now showing items 91-100 of 370
Obtenção e caracterização de nanocompósitos de poliuretano termoplástico reforçado com nanocristais de celulose
(Universidade Federal de São Carlos, 2014-07-15)
In this study the potential of cellulose nanocrystals (CNC) as a
reinforcement of a thermoplastic polyurethane partially obtained from renewable
sources (Bio-TPU) was investigated. The nanocomposites were obtained in ...
Avaliação da ação de estabilizantes anti-UV no desempenho de compósitos de polipropileno, reforçados com fibras de coco, submetidos a diferentes técnicas de envelhecimento artificial
(Universidade Federal de São Carlos, 2016-06-30)
Currently, there has been a search for economically viable and sustainable
products in various market segments. Lighter materials that can be recycled
have become a strategic issue for many industries. In this sense, the ...
Reutilização de fibras de para-aramida como reforço mecânico em poliamida 6,6
(Universidade Federal de São Carlos, 2016-06-09)
Aramid fibers are very known by their excellent combination of tensile strength and elastic modulus with low density. On the other hand, aramids do not melt which difficult the recycling process. This property is an important ...
Tenacificação de poli(ftalamida) (PPA) através de nanocompósitos com carbonato de cálcio e de blendas com copolímero estireno/etileno-butileno/estireno (SEBS)
(Universidade Federal de São Carlos, 2010-05-20)
This project aims the toughening of a high performance thermoplastic polyphthalamide (PPA). PPA resins is a good choice for special applications where the conditions are more severe than the ones an engineering thermoplastic ...
Fadiga de ligas de titânio com superfície modificada com nanotubos
(Universidade Federal de São Carlos, 2016-07-29)
Among the surface modification techniques to improve the fixation, biocompatibility and corrosion resistance of titanium implants, one of the most recent and promising is the electrochemical anodization in electrolytes ...
Identificação de um modelo constitutivo para simulação computacional do processo de prensagem a frio de um material refratário sílico-aluminoso
(Universidade Federal de São Carlos, 2016-08-05)
One of the methods for the processing of refractory material is cold pressing of the powder material, followed by sintering. Heterogeneous distribution of density can occur in the green compact during pressing because of ...
Identificação das variáveis que ocasionam a variação de tonalidade utilizando a técnica de decoração por cilindros de silicone gravados a laser
(Universidade Federal de São Carlos, 2015-11-30)
A major problem in the production of ceramic tiles for coating is the variation of
tonality. The determination of their origin within the entire production process and to
minimize its occurrence by the manufacturer is ...
Correlações entre parâmetros microestruturais, parâmetros térmicos e resistência mecânica de ligas Sn- Bi e Sn-Bi-(Cu,Ag)
(Universidade Federal de São Carlos, 2016-10-07)
The present research aims to develop a theoretical/experimental analysis of the
combined effects of solidification thermal parameters, Bi content and addition of
ternary elements (Cu, Ag) on the final microstructure ...
Zircônia CO-dopada por compensação de cargas nos sistemas (ZrO2)1-(x+y)(InO1,5)x(MOz)y com MOz = TaO2,5, NbO2,5, MoO3 ou WO3, como revestimento para barreira térmica
(Universidade Federal de São Carlos, 2016-09-30)
InO1.5-stabilized zirconia (InSZ) is a potential hot corrosion resistant thermal
barrier coating (TBC). However, the thermal instability prevents real applications
of InSZ-based TBC. This thesis investigates the hypothesis ...
Preparação de membranas poliméricas porosas a partir de técnicas de espumação com agentes físicos de expansão
(Universidade Federal de São Carlos, 2016-07-07)
The objective of this master’s thesis was to develop a process of
manufacturing porous polymer membranes for microfiltration by a one-step
foaming technique, using carbon dioxide (CO2) as physical blowing agent and
ethanol ...