Buscar
Itens para a visualização no momento 71-80 of 370
Correlação entre os resultados de tração a quente e fluência para o cobre comercialmente puro
(Universidade Federal de São Carlos, 2011-03-11)
Hot tensile test data were correlated with creep data, in commercially pure copper, using a recently proposed criterion for the analysis of these two kinds of tests at high temperature. The criterion considers the equivalence ...
Estudo da solidificação do aço rápido M2 em diferentes lingotes e seus efeitos na microestrutura e propriedades mecânicas finais
(Universidade Federal de São Carlos, 2011-08-03)
The high speed steels are mostly applied in cutting tools, like drills, cores and top milling cutter. Its microstructure is composed by martensite, with high hardness, strong tempering resistance and disperses carbides on ...
Análise da influência das condições de processamento na morfologia e nas propriedades de blendas poliméricas PBT/ABS moldadas por injeção
(Universidade Federal de São Carlos, 2011-06-29)
A study on the correlation of blend morphology, properties, the injection molding process and manufacturing methods of polymeric blends constituted of PBT and ABS was proposed. Thus, uncompatibilized PBT/ABS blends have ...
Modificação por nitretação a plasma das superfícies dos aços AISI-4140, AISI-420C e DIN16MnCr5
(Universidade Federal de São Carlos, 2011-05-26)
Plasma nitriding is a surface modification technique used for improving hardness, wear resistance, and fatigue. In this work, samples of AISI-4140, DIN16MnCr, and AISI-420C steels were heat treated, forming martensitic ...
Moagem de alta energia e deformação plástica severa do Mg e do Mg-Fe na síntese de hidretos para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2017-03-04)
Magnesium is a light metal with a relatively low cost. It can form magnesium hydride (MgH2), which is interesting for the safe storage of hydrogen in the solid state, thanks to its high gravimetric capacity of 7.6%. The ...
Comportamento mecânico de poli(éter-éter-cetona) revestida com hidroxiapatita por aspersão plasma para uso em implantes cirúrgicos
(Universidade Federal de São Carlos, 2015-12-10)
The remarkable advances in scientific research of materials for ever demanding service requirements has led to novel developments of biomaterials, especially in the field of surgical implants. In this field, the semi-crystalline ...
Deformação da fase dispersa e degradação de blendas poliméricas em extrusora dupla-rosca aberta e fechada
(Universidade Federal de São Carlos, 2011-09-05)
In order to obtain flexibility of the processing in a twin-screw extruder and operate it as an internal mixer, the second phase dispersion and deformation and degradation were analyzed during processing in an open and ...
Estudo das propriedades mecânicas do aço ao boro 50B35 com diferentes tamanhos de grãos
(Universidade Federal de São Carlos, 2015-07-22)
Boron steel has excellent hardenability due to the addition of small quantities of
boron. Boron atoms reduces the nucleation rate of ferrite and bainite [1]. It is
known that austenitizing temperature and time and cooling ...
Avaliação da durabilidade do concreto utilizado em postes em São Luís
(Universidade Federal de São Carlos, 2016-06-20)
Reinforced concrete structures built in coastal areas, such as electricity distribution poles, are constantly attacked by aggressive environmental agents. Rebar corrosion mechanism is a specific manifestation of electrochemical ...
Comportamento mecânico em fadiga da liga de titânio beta metaestável Ti-5553
(Universidade Federal de São Carlos, 2016-10-14)
The microstructure of metastable beta Ti alloys is a decisive factor that
governs their properties and, therefore, the assessment of the relation between
the microstructure and the fatigue response means an advance in ...